Rings Mounts Bases

  • grid
  • list
  • ULTRALIGHT EXTENDED SCOPE MOUNTS AERO PRECISION
    $89.99 - $99.99

    Item Code: #453217907

    Availability: In stock

    Featuring a rigid, lightweight design, Aero Precisions' Ultralight Extended Scope Mounts complement many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection.   The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 1" for better eye relief Designed for AR type upper receivers 6061 T6 extruded aluminum construction Rigid and lightweight Weight: 3.07oz

    AR-15, Issue:11, Page:091 Big Book Catalog, Issue:69, Page:090
  • RECON-S NO OFFSET SCOPE MOUNT AMERICAN DEFENSE
    $159.95 - $170.95

    Item Code: #453217907

    Availability: In stock

    Rock-Solid Mounts With Quick-Detach System Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.

    AR-15, Issue:11, Page:091 Big Book Catalog, Issue:69, Page:090
  • XTR Xtreme Tactical Rings BURRIS
    $53.99 - $99.99

    Item Code: #453217907

    Availability: In stock

    Designed specifically to stand up to the rigor and immense recoil that accompanies tactical shooting, these heavy-duty Xtreme Tactical Rings keep your optics secure for the most demanding missions. These super-strong rings are made of lightweight aluminum. Six screws anchor these rings and your riflescope in place on any Picatinny or Weaver-style rail for an unfailing return-to-zero. Choose from four ring heights to suit your optical objective, whether it’s a red dot sight or riflescope scope. These rings are perfect for riflescopes on AR-15/ M16 flattop receivers and give you ample room for a proper cheek weld. These sturdy rings will also look good on varmint rifles, and they’ll definitely be of benefit to big game rifles that are susceptible to the abuses of hard hunting and magnum recoils. Available in 1" and 30mm sizes. Ring heights measured from top of scope base to inside bottom of ring.

    Sinclair, Issue:5B, Page:204
  • AR-15/M16 M-223 SCOPE MOUNT NIKON
    $49.95 - $119.95

    Item Code: #453217907

    Availability: In stock

    Forward Cantilever For Plenty Of Eye Relief; 20 MOA Model Available Lightweight aluminum mount clamps to flattop receiver and is custom engineered to provide optimum height and eye relief for the Nikon M-223 series of scopes. Can also be used with a variety of other optics with 1" O.D. tubes. Cantilever extends 2" forward of the receiver to accommodate long eye relief scopes. Three steel crossbolts and the full-length clamping bar secure the mount to any MIL-STD 1913 Picatinny receiver rail.  XR model offers a built-in 20 MOA elevation that aids in accurate long-range shooting without exceeding your scope’s elevation adjustment. Can be used on other scopes with 1" O.D. tubes.

    AR-15, Issue:11, Page:099 AR-15, Issue:11, Page:100 Big Book Catalog, Issue:69, Page:092 Big Book Catalog, Issue:69, Page:276 Sinclair, Issue:5B, Page:183
  • STANDARD TWO-PIECE RIFLE BASES LEUPOLD
    $22.99 - $37.49

    Item Code: #453217907

    Availability: In stock

    CNC Machined Two-piece base sets, CNC machined to exacting tolerances, provide rock solid scope mounting. Reversible and long rear bases make it easy to use standard rings to mount scopes, from extra long varmint and target models to small compacts on any length action. Front bases accept Leupold’s (and Burris/Redfield/Millett) rotary dovetail ring. The rear base uses standard Leupold/Burris/Redfield/Millett windage, screw-secured ring.

    Big Book Catalog, Issue:69, Page:253 Sinclair, Issue:5B, Page:203
  • 30MM TACTICAL RINGS NIGHTFORCE
    $165.00

    Item Code: #453217907

    Availability: In stock

    Extra Strong For Police & Military Applications Milled from barstock, these rings provide the solid strength required for harsh field and tactical use. With four TORX screws per cap, the scope is securely locked into the ring to prevent recoil movement. Large, ½" hex nut lets you torque ring securely to any MIL-STD 1913 Picatinny base, and helps achieve a consistent return to zero. Steel cross lug provides additional strength, prevents shifting caused by recoil.

    AR-15, Issue:06, Page:076 Big Book Catalog, Issue:69, Page:255 Sinclair, Issue:5B, Page:209
  • STANDARD ONE-PIECE BASES LEUPOLD
    $25.99 - $37.49

    Item Code: #453217907

    Availability: In stock

    Machined from Cold-Rolled, Steel Bar Stock Carefully machined from cold-rolled, steel bar stock, featuring generous windage adjustments for rear ring and precision fitted rotary dovetail for front ring. Note: "STD" Mount Bases accept Burris, Millett and Redfield rotary dovetail rings.

    Big Book Catalog, Issue:69, Page:254 Sinclair, Issue:5B, Page:203
  • RECON QUICK DETACH SCOPE MOUNTS AMERICAN DEFENSE
    $179.95 - $185.95

    Item Code: #453217907

    Availability: In stock

    Rock-Solid Mounts With Quick-Detach System The RECON mount is ideal for putting optics onto a flattop style AR-15. The cantilver throws the scope out front, allowing for proper eye relief. Machined from 6061 T6 Aluminum and finished in hard coat T3 Mil-Spec anodize. Features ADM's patented QD Auto Lock System to accommodate both in spec and out of spec rail systems.

    AR-15, Issue:11, Page:091 Big Book Catalog, Issue:69, Page:090
  • LIGHT WEIGHT SCOPE MOUNT TALLEY
    $47.99

    Item Code: #453217907

    Availability: In stock

    When Every Ounce Counts; The Strength Of Steel Without The WeightOne-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, TORX screws, to keep large scopes from slipping or shifting. Designed by Mel Forbes of New Ultralight Arms. Big Book Catalog, Issue:69, Page:257
  • ONE-PIECE SCOPE MOUNTS BADGER ORDNANCE
    $175.00 - $189.99

    Item Code: #453217907

    Availability: In stock

    These one-piece scope mounts from Badger Ordnance provide a rock-solid mount for scopes with 34mm tubes. Their monolithic construction withstands harsh recoil, and makes for easy mounting onto any Picatinny receiver rail. Available in two heights, both measured from bottom of mount to center of optic. 1.3" height has built-in 20 MOA elevation. 1.49" height has no MOA. Rings secure with 4 Torx® head screws each. Reducer rings, available separately, allow use on 30mm scope tubes. Includes installation wrench.

    Sinclair, Issue:5B, Page:206
  • XTR SIGNATURE RINGS BURRIS
    $89.95 - $129.95

    Item Code: #453217907

    Availability: In stock

    Unique, self-centering, dual steel clamps with full cross-through connection assure proper center on any width Picatinny rail, while adding extra strength. Burris XTR rings ONLY fit a Picatinny style rail. Revolutionary Pos-Align® Inserts technology, in a tactical ring configuration Pos-Align Inserts guarantee perfect centering and maximum scope-to-ring contact for tremendous gripping power without damaging the scope finish. Lets you virtually sight in your gun without moving the scope adjustments. Corrects misalignment caused by off-center receiver holes Corrects for bases or rings being slightly off-center No need for expensive tapered bases or shimming for thousand-yard shooting Rugged, robust aluminum tactical rings save weight and mount on any Picatinny-style rail Each ring set includes two sets of concentric inserts and one set each of the following offset inserts: +/-5 MOA, +/-10 MOA, +/-20 MOA Only Fit a Picatinny Style Rail

    Sinclair, Issue:5B, Page:204
  • AR-PEPR PERMANENT MOUNTS BURRIS
    $80.99 - $107.99

    Item Code: #453217907

    Availability: In stock

    Provides Extra Clearance For Long Eye Relief Scope; Ring-Top Slots For Additional Accessories One-piece cantilever mount with integral rings positions the optic almost 2" farther forward to provide extra clearance needed for a night vision device (NVD), add-on magnifier, or long eye relief scope. The “Proper Eye Position Ready” mount also features built-in, two-slot rails on the tops of the rings for convenient mounting of reflex sights or other accessories. Each top ring strap is secured with six Torx® screws to prevent recoil-induced slippage. Side locking bar with two, steel hex nuts and cross-bolts hold tight on any Picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging.

    AR-15, Issue:11, Page:091 Big Book Catalog, Issue:69, Page:092 Sinclair, Issue:5B, Page:205
  • SIGNATURE ZEE RINGS BURRIS
    $39.99 - $61.99

    Item Code: #453217907

    Availability: In stock

    This patented ring design utilizes synthetic inserts that pivot within a steel outer ring allowing them to line up scope tube and rings without bending or stressing the scope tube. This assures no optical distortion. The rings come completely ready to go and can be used on any Weaver-Style base.

    Big Book Catalog, Issue:69, Page:252 Sinclair, Issue:5B, Page:205
  • RUGER® MINI-14® MINI-SCOUT™ MOUNTS AMEGA RANGES, INC.
    $129.99 - $133.99

    Item Code: #453217907

    Availability: In stock

    Allows Forward Mounting Of Optics & Accessories; Helps Control Barrel Vibration This brainchild of Bill Ruger hails from the enduring designs of John C. Garand, and is one of the most popular utility rifles ever produced in the USA. Now you can upgrade yours to a scout format that will accept the latest technology available in modern sight systems, lasers, tactical flashlights, etc. The ORIGINAL Mini-Scout-Mount™14 fits every serial number range manufactured prior to 2007 (before the 580 Series), including Ranch Rifles and AC556. These are Flat Black . The Mini-Scout-Mount™III will fit all three caliber versions of the 580 and up series (.223, 6.8spc, and 7.62x39) with the heavier “flanged” barrel. It will also fit the Target Models with barrel tuners.

    Big Book Catalog, Issue:69, Page:245 Big Book Catalog, Issue:69, Page:246 Big Book Catalog, Issue:69, Page:249
  • TSR-W PICATINNY/WEAVER SCOPE RINGS TPS PRODUCTS, LLC.
    $86.99 - $144.99

    Item Code: #453217907

    Availability: In stock

    TSR "W" Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases.

    AR-15, Issue:11, Page:094 Big Book Catalog, Issue:69, Page:094 Big Book Catalog, Issue:69, Page:256
  • AK SCOUT MOUNT MODEL M2-B ULTIMAK
    $94.99

    Item Code: #453217907

    Availability: In stock

    Mount Picatinny Accessories For Mission-Specific Needs The M2-B has a Picatinny style rail positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. (with vent holes, as found mostly on Chinese AKs) Replaces gas tube. Clamps directly to barrel for maximum stability and accuracy. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions.  No Gunsmithing.  Made in U.S.A.

    Big Book Catalog, Issue:69, Page:185
  • TOP MOUNT RINGS WEAVER
    $27.99 - $39.99

    Item Code: #453217907

    Availability: In stock

    Now In Stainless Finish, Too!!Heights: Low and Medium for scopes w/objective diameters to approximately 1.75"(44.45mm). High for objectives above 1.75". Extra High for scopes with objectives up to 60mm. Big Book Catalog, Issue:69, Page:260
  • MARLIN 1894/1895/336/308MX LEVER RAIL SIGHT SYSTEM XS SIGHT SYSTEMS
    $135.00 - $150.30

    Item Code: #453217907

    Availability: In stock

    Lightweight scope rail with backup iron sights mounts to Marlin lever rifles without drilling and trapping. Features a large light-gathering rear ghost ring and high-visibility front post sight for fast sight acquisition during day or low-light conditions. Rear ghost ring is fully adjustable for windage and elevation, and includes interchangeable .191" and .230" diameter apertures for fine-tuning accuracy. One-piece front sight has easy-to-use .100" wide, white-line post. Rail accepts Picatinny or Weaver-style mounts. Extra-long design allows scope mounting directly over the receiver, or forward over the barrel with intermediate eye relief optics or red-dot sights. Requires removal of factory rear sight. Gunsmith installation recommended.

    Big Book Catalog, Issue:69, Page:251 Big Book Catalog, Issue:69, Page:291
  • SCHMIDT-RUBIN K31 SCOPE MOUNT SWISS PRODUCTS
    $64.99 - $119.99

    Item Code: #453217907

    Availability: In stock

    Helps Achieve The Accuracy These Rifles Are Famous For; Choose From Steel Or AluminumSturdy, machined aluminum mounts let you improve sighting and accuracy. Compact and lightweight, with a full-length rail that accepts 3/8" scope rings. Clamp-On mount positions the scope along the right side of the receiver. Does not interfere with bolt operation and requires no modifications to rifle. Permanent Mount positions scope to the left side of the receiver. Requires drilling and tapping for three, 10-32 screws. Big Book Catalog, Issue:69, Page:250
  • SUPER PRECISION AR-15 MOUNTS GEISSELE AUTOMATICS LLC
    $325.00 - $350.00

    Item Code: #453217907

    Availability: In stock

    The Geissele AR-15/M4 Super Precision series of scope mounts are optimized for use with an AR-15/M4 upper. The mounting surface spans 7 picatinny sections and utilizes 4 shear lugs. These mounts use Geissele’s update of the classic nut and bolt method for clamping the mount to the picatinny rail, which is the most secure method of attaching your scope to your weapon. Each nut and bolt combination provides 1,400 pounds of clamping force, much more than any lever mounting arrangement. The Geissele Super Precision Mounts are available in 7075-T6 high strength aluminum. To create a mount with the best possible return to zero Geissele machines the entire mount from a single piece of billet aluminum. This allows them to add pockets and ribs throughout the mount for added strength and rigidity. It allows them to line bore the caps to each another and then serialize the caps to the body. The line bore operation creates the best possible fit to the body of your scope so that you can apply proper torque without fear of crushing or damaging the body of your scope. Another advantage of machining from a single piece of aluminum is that Geissele is able to create a mount with cap locations that will suit a wide variety of scopes. All mounts are available in zero and 20 MOA cant options, and in either black type 3 hard coat anodize or DDC (Desert Dirt Color) type 3 hard coat anodize.

  • REMINGTON 700, 722, 40X SHORT ACTION SCOPE BASES EGW
    $39.99 - $44.99

    Item Code: #453217907

    Availability: In stock

    No Frills Accuracy Enhancement For Popular Rifles EGW Remington 700, 722, 40X Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.

    Big Book Catalog, Issue:69, Page:248 Sinclair, Issue:5B, Page:207
  • TACTICAL SCOPE RINGS VORTEX OPTICS
    $19.99

    Item Code: #453217907

    Availability: In stock

    Mounting to a Picatinny rail—The wide, 6-screw Tactical ring offers solid support for 30mm riflescope tubes.  Scope Ring Heights are measured from the base to the center of the ring.Sold one ring per package.

    Big Book Catalog, Issue:69, Page:258
  • QRW RINGS LEUPOLD
    $61.99 - $77.99

    Item Code: #453217907

    Availability: In stock

    QRW Rings (Quick Release Weaver style) means detachable accuracy in a cross-slot format. QRW rings use an adjustable, double-lever mechanism to securely lock the rings onto your Weaver style base. Will fit any existing cross-slot Weaver style bases, or can be teamed up with Leupold QRW bases as shown above. The advantages of these mounts are many; you can remove scopes for travel, use one scope for two or more rifles, use a high magnification scope for bench work and a low power scope for hunting, etc. Ring height is measured from the contact point with the base to the center of the ring. Rings feature Torx® fasteners and include a wrench. Order bases separately. Measured from the top of the base to center of ring.

    Big Book Catalog, Issue:69, Page:254 Sinclair, Issue:5B, Page:203
  • TOP MOUNT BASES - #68-#604 WEAVER
    $4.99 - $21.99

    Item Code: #453217907

    Availability: In stock

    One- & Two-Piece Bases For Rifles, Shotguns, HandgunsLightweight aluminum bases fit a wide range of modern and older rifles, plus shotguns and long range handguns. Sold each; order front and rear base. Click here to find the right base for your rifle model. One piece bases and base pair sets available for some models. Base pair sets are marked with * or **. View more models: #11 through #62

    Big Book Catalog, Issue:69, Page:262 Big Book Catalog, Issue:69, Page:263 Sinclair, Issue:5B, Page:210
Scroll