Patrol Rifle Parts

  • grid
  • list
  • AR-15 LOWER RECEIVER PARTS KIT DPMS
    $62.99

    Item Code: #453217907

    Availability: In stock

    Sub-Assembly, Mil-Spec Parts Packaged In Money-Saving Kits The easiest way to stock and sell genuine, mil-spec AR-15 parts, or use to assemble rifles on your receivers. Much lower in total cost than buying the parts one at a time. Kit contains only new, current-production, genuine, mil-spec parts; never pull-offs or direct-exchange surplus. Lower Receiver Parts Kit includes trigger spring, trigger pin, hammer spring, hammer pin, disconnector and spring, bolt catch, bolt catch plunger, bolt catch spring, bolt catch roll pin, selector, selector detent, selector detent spring, (2) takedown detents and springs, pivot pin, rear takedown pin, buffer retainer and spring, magazine catch, button and spring, screw and washer, triggerguard assembly, pin, hammer, trigger and pistol grip.

    AR-15, Issue:11, Page:039 Big Book Catalog, Issue:69, Page:038 Sinclair, Issue:5B, Page:250
  • AR-15 RAPTOR CHARGING HANDLE 5.56 AXTS WEAPONS
    $85.99

    Item Code: #453217907

    Availability: In stock

    For Fast, No-Slip Charging Of Rifle With Left Or Right Hand Drop-in replacement for factory issue handle lets you charge the rifle from either side of the receiver with a rapid palm “blading” motion or the traditional finger/thumb hold. Dual, over-sized release levers are mirror images of each other, with deeply grooved surfaces that ensure positive contact so you can operate the handle in one fluid, fast motion with wet or gloved hands. Radiused edges won’t cut the hand or snag on clothing and gear. Gives top of rifle a unique, aggressive appearance, too.

    AR-15, Issue:11, Page:034 Big Book Catalog, Issue:69, Page:033
  • CTR BUTTSTOCK MAGPUL
    $56.95

    Item Code: #453217907

    Availability: In stock

    Locking System Eliminates "Play" Features a friction locking mechanism that eliminates movement between the buffer tube and buttstock for a solid “feel” when mounting rifle to shoulder. Heavy duty, spring-loaded hand lever allows fast length-of-pull adjustments. Nylon polymer body provides maximum impact and heat resistance, with molded-in reinforcements at stress points. Accepts a variety of ambidextrous sling attachment options, including web slings and single-point, push-button sling mounts. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid cheekweld. Synthetic rubber buttpad increases comfort and helps prevent slippage. Fits buffer tubes that accept both four- and six-position collapsible stocks. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Available in Black, Dark Earth, and O.D. Green, so you can match the color of your stock to your tactical rifle's color scheme. Mil-Spec fits smaller 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec carbines.

    AR-15, Issue:11, Page:045 Big Book Catalog, Issue:69, Page:044
  • AR-15/M16/ 308 AR SSA TRIGGER GEISSELE AUTOMATICS LLC
    $220.00

    Item Code: #453217907

    Availability: In stock

    Two-Stage Trigger With Ultra-Fast Lock Time; Adjustable & Pre-Set ModelsSuper Semi-Automatic (SSA) 2-stage combat trigger has a fixed 4½ lb. total pull weight, non-adjustable sear engagement, and additional safety features ideal for CQB and mid-range carbine work. A secondary “safety sear” captures the hammer if the primary sear accidentally releases due to hard impact, ensuring the rifle can fire only when the shooter actually pulls the trigger. Trigger pull is optimized for both deliberate, aimed fire and quick, “snap shooting.” The first stage builds gradually to 2½ lbs., with a 2 lb. second stage that breaks clean, so the shooter can stay on target throughout the pull. A lightweight hammer driven by a full-power hammer spring speeds locktime and delivers positive ignition of all ammo types. All contact surfaces are wire-EDM cut to exact dimensions for precise engagement free of play. Direct replacement for factory trigger; may be installed without removing the safety. Operation and parts layout is similar to the USGI M16 trigger for easy maintenance. All springs are captive to simplify field disassembly for cleaning. Hammer and trigger pins are a close slip-fit in nominal .154" (small pin) mil-spec receiver holes to enable installation with basic tools. Super Semi-Automatic-Enhanced (SSA-E) offers an even lighter, 3½ lb. total pull weight, making it an excellent choice for precision Squad Designated Marksman type rifles where both accuracy and reliability are critical. First stage builds gradually to 2.3 lbs., followed by a 1.2 lb. second stage with a crisp, “candy cane-like” break. A semi-auto-only version of the Geissele full-auto combat trigger presently used in the U.S. Special Operations community.

    AR-15, Issue:11, Page:028 Big Book Catalog, Issue:69, Page:027 Sinclair, Issue:4X, Page:020
  • AR-15/M16 STRIPPED UPPER RECEIVER AERO PRECISION
    $84.99

    Item Code: #453217907

    Availability: In stock

    Economical Yet High-Quality Upper For Your Custom Build The Aero Precision upper is made of 7075 aircraft aluminum for superior strength and given a super tough, Type 3 hardcoat anodized finish for excellent wear resistance. Models with laser-engraved T-marks and an American flag on the Picatinny rail, plus M4-type feed cuts inside for reliable feeding also available. Compatible with standard, mil-spec AR lowers and components. A really high-quality receiver at a great price!

    AR-15, Issue:11, Page:001 Big Book Catalog, Issue:69, Page:001
  • AR-15/M16 MBUS GEN 2 SIGHT SYSTEM MAGPUL
    $89.99

    Item Code: #453217907

    Availability: In stock

    Reliable, Low-Profile, Quick-Deploy Backup Sights Low-profile, flattop-mounted, polymer sights deploy instantly at the touch of a finger to provide backup sighting if a primary optic fails. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous release mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight when you’re done. Uses less than 1" of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel crossbolt. Provides the same height over bore as standard A2 iron sights. Windage-adjustable rear sight has two apertures: a large, .185" peep and a .070" peep. Designed for AR-type rifles and carbines, fits any weapon with Picatinny rails. Front sight must be mounted on a railed forend on the same plane as the receiver rail to witness correctly with rear sight. Not compatible with railed gas blocks or the MOE handguard.

    AR-15, Issue:11, Page:067 Big Book Catalog, Issue:69, Page:067
  • AR-15 BCMGUNFIGHTER™ CHARGING HANDLE BRAVO COMPANY
    $49.95

    Item Code: #453217907

    Availability: In stock

    Unique Latch Mechanism Reduces Wear & Prevents Breakage Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Available with Medium length extended latch or Large latch that’s ¼" longer for an even bigger, “can’t miss” grasping surface. Small latch duplicates the size of the issue latch but includes the same design upgrades as the Medium and Large latches for increased strength and dependability.

    AR-15, Issue:11, Page:034 Big Book Catalog, Issue:69, Page:032 Sinclair, Issue:5B, Page:250
  • AR-15/M16 AMBIDEXTROUS SAFETY SELECTOR BATTLE ARMS DEVELOPMENT INC.
    $57.00 - $99.00

    Item Code: #453217907

    Availability: In stock

    Oversized, Deeply Grooved Levers For Positive Operation With Either HandMachined, heat-treated steel safety selector puts oversized levers on both sides of the receiver for easy ambidextrous operation. Large surface area lets you operate the safety while wearing gloves, and eliminates fumbling in the dark. Pads are deeply grooved for an ultra-secure grip under stress or when hand is wet. Can be customized by positioning the larger pad on either side of the receiver, or by applying high-visibility paint. Mounting hardware included. Individual Safety Selector Levers are available for customization. Available individual levers include Standard, Short, Thin, Short & Thin, Hybrid, and Crank Levers. They Hybrid lever features a standard width top, with a thin end. The Crank lever features a large end, and thin arm up towards the top. Short Throw Safety Selector shortens the throw distance to 45o instead of 90o.  This short throw distance allows for a rapid transition from “Safe” to “Fire”.  The Short Throw Safety Selector can only be used in 45o compatible lower receivers. Available with a Matte Black finish. Original Ambidextrous Safety Selector also available in Cerakoted in Flat Dark Earth. Also available for the S&W M&P 15-22.

    AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035 Sinclair, Issue:5B, Page:250
  • AK-47/74 UNIVERSAL HANDGUARD MIDWEST INDUSTRIES, INC.
    $119.99

    Item Code: #453217907

    Availability: In stock

    Brings The Versatility Of AR-Style Rail Mounts To Your Kalashnikov High-quality, lightweight, aluminum handguard gives your AK-47 the convenience and versatility of rail mounting for lights, lasers, optics, vertical grips and other accessories. Installs in minutes with no gunsmithing or permanent modifications required. Precision machined from lightweight aluminum alloy, hardcoat anodized for a tough finish that resists surface wear. T-marked MIL-STD 1913 Picatinny rails bring your AK up to speed by accepting a wide range of accessories used on the AR-15/M16 platform. Handguard w/M2 Top Cover allows the use of red dot sights & iron sights. Iron sights will appear in the lower one third. Provides cooler operating environment for optic. Accepts most full size 30mm red dot sights including: Aimpoint COMPML2, Burris Speed Dot, Trijicon Tri-Power., Vortex Strikefire, Primary Arms M3 (will not cowitness). Extended Universal Handguard extends the lower rail to 9.5 inches for additional mounting surface. The Extended Model is available with the standard Picatinny top cover.

    Big Book Catalog, Issue:69, Page:184
  • AR-15 MBUS GEN 2 REAR SIGHTS MAGPUL
    $55.05

    Item Code: #453217907

    Availability: In stock

    Low-profile, flattop-mounted, polymer sights deploy instantly at the touch of a finger to provide backup sighting if a primary optic fails. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous release mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight when you’re done. Uses less than 1" of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel crossbolt. Provides the same height over bore as standard A2 iron sights. Windage-adjustable rear sight has two apertures: a large, .185" peep and a .070" peep. Designed for AR-type rifles and carbines, fits any weapon with Picatinny rails.

    AR-15, Issue:11, Page:067 Big Book Catalog, Issue:69, Page:067
  • AR-15/M16 MOE BUTTSTOCK MAGPUL
    $37.95

    Item Code: #453217907

    Availability: In stock

    Economical, Drop-In Upgrade For Carbine Collapsible Stock Magpul Original Equipment (MOE) carbine buttstock provides the quality, durability, and ergonomic benefits of Magpul’s CTR stock in a rugged, economical, drop-in package. Strong, A-frame design is lightweight and comfortable, yet provides operator with plenty of support. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid, consistent cheekweld. Streamlined exterior and protected release lever won’t snag on clothing, gear, vehicle interior, or vegetation. Heavy duty, spring-loaded release lever allows fast length-of-pull adjustments and won’t dig into your hand. Impact- and heat-resistant, polymer construction includes molded-in reinforcements at stress points, plus two slots for web slings and a hole for a toe-mounted sling swivel or clip-on sling. Soft, synthetic rubber buttpad increases comfort and helps prevent slippage. Mil-Spec fits 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec tubes that accept both four- and six-position collapsible stocks.

    AR-15, Issue:11, Page:044 Big Book Catalog, Issue:69, Page:042
  • AR-15 PRS STOCK COLLAPSIBLE RIFLE LENGTH MAGPUL
    $242.25

    Item Code: #453217907

    Availability: In stock

    Adjustable Length Of Pull & Comb Height Fully adjustable stock and comb for AR-15/M16 rifles readily adapts length of pull and comb height with two click-detent adjustment wheels. Drop-in installation on rifles with standard A1/A2 fixed buffer tubes without A2 spacer. Rubber buttpad seats securely onto your shoulder and won’t slip during sustained shooting exercises. Fully-raised comb will not get in the way of charging handle operation. Removable base cover conceals an accessory rail to provide a mounting platform for a monopod. Removable sling loops can be mounted on either side of stock to accommodate your preferred carry position. Get the PRS Stock QD Sling Adapter to use with your PRS stock.

    AR-15, Issue:11, Page:046 Big Book Catalog, Issue:69, Page:045 Sinclair, Issue:5B, Page:250
  • AR-15/M16 B.A.D. LEVER™ MAGPUL
    $28.45

    Item Code: #453217907

    Availability: In stock

    Lets You Release The Bolt With The Trigger Finger; Improves Readiness & EfficiencyThe Magpul Battery Assist Device (B.A.D.) is an extended bolt release that allows the shooter to keep his hand in the ready position on the pistol grip and operate the bolt catch with the trigger finger. Streamlines bolt catch manipulation to get the weapon into battery more quickly for improved operator readiness and weapon handling efficiency. Easy to install and remove—no weapon disassembly required. The B.A.D. lever clamps securely to the factory bolt release with a Torx® head screw and extends a paddle through the front of the triggerguard to the right-hand side of the weapon. Trigger finger can stay outside the triggerguard as you operate the lever, and factory bolt catch retains normal function with B.A.D. installed. Made of a high-grade aluminum alloy, hardcoat anodized to MIL-A-8625F, Type III, Class 2 spec for extra strength and wear resistance.

    AR-15, Issue:11, Page:035 Big Book Catalog, Issue:69, Page:034 Sinclair, Issue:5B, Page:250
  • AR-15/M16 5.56 HAMMER FORGED BARRELS DANIEL DEFENSE
    $275.00

    Item Code: #453217907

    Availability: In stock

    Cold Hammer Forged For Superb Accuracy; Chrome-Lined For Long Life These barrels are cold hammer-forged from high-grade chromium-molybdenum-vanadium alloy steel for exceptional strength and accuracy potential—like a high-end match rifle barrel. Magnetic particle inspection (MPI) ensures there are no internal flaws in the metal. Durable manganese phosphate finish give excellent resistance to surface wear. Barrel extension has M4-type feed ramps. Choose caliber, profile and length. 5.56x45 barrels come in 10.5”, 14.5” and 16” lengths, with the shorter barrels featuring carbine length gas system. Barrels are available in lightweight or government contours, and M4 for the 14.5” length. OD at gas block is .750”.

    AR-15, Issue:11, Page:019 Big Book Catalog, Issue:69, Page:018
  • AR-15 MOE K GRIP MAGPUL
    $18.95

    Item Code: #453217907

    Availability: In stock

    Slimmed-down version of the original MOE grip for shooters with smaller hands or those who simply prefer a slimmer grip profile. Fits most AR-15/M16 type rifles, including AR-style .308s that use a standard AR-15 pistol grip. Narrower and shorter front to back than the original MOE or the standard A2 grip, the MOE-K is designed specifically for personal defense weapons and their operators by adding more vertical grip angle that brings the primary hand closer to the shooter’s body, thus improving control and retention.

    AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057
  • AR .308 M11 MUZZLE BRAKE 30 CALIBER PRECISION ARMAMENT
    $119.99

    Item Code: #453217907

    Availability: In stock

    Superior Recoil Management With Minimal Dust Signature Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. Wrench flats on top and bottom for easy installation and removal. Accu-Washer Muzzle Alignment System advised for installation.

    AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023 Sinclair, Issue:5B, Page:249
  • DIAMOND-PATTERN FREE-FLOAT HANDGUARD YANKEE HILL MACHINE CO., INC.
    $122.70 - $160.70

    Item Code: #453217907

    Availability: In stock

    Diamond Shaped Vents For Superior Heat Dissapation Diamond-shaped vents in a unique, latticework pattern give your weapon a distinctive look and provide superb airflow to prevent barrel from overheating. Helps keep your hand cool, too, while reducing weapon's overall weight. Provides four, full-length Picatinny rails for maximum flexibility in mounting tactical accessories. Four, full-length Picatinny rails provide maximum flexibility in mounting tactical accessories. Machined from high-grade 6061 T6 aluminum and mil-spec hardcoat anodized to withstand combat and heavy-duty usage. Extended top rail gives a gap-free fit to receiver rail. Slots are marked alphanumerically to help identify accessory locations. Threaded front end accepts Yankee Hill screw-in end cap, available separately. Comes with jam nut, barrel nut and anti-rotation screws to ensure handguard stays locked in place.

    AR-15, Issue:11, Page:054 Big Book Catalog, Issue:69, Page:054
  • AR-15/M16 5.56 S2W HAMMER FORGED BARREL DANIEL DEFENSE
    $275.00

    Item Code: #453217907

    Availability: In stock

    This barrel is cold hammer-forged from high-grade chromium-molybdenum-vanadium alloy steel for exceptional strength and accuracy potential—like a high-end match rifle barrel. Magnetic particle inspection (MPI) ensures there are no internal flaws in the metal. Salt Bath Nitride treatment gives excellent resistance to surface wear. Barrel extension has M4-type feed ramps.  Strength 2 Weight 5.56x45 barrels feature a 1-7 twist, and have a heavier profile, that tapers down towards the muzzle. This profile provides superior strength and rigidity. OD at gas block is .750”.

    AR-15, Issue:11, Page:019 Big Book Catalog, Issue:69, Page:018
  • AR-15/M16 223 WYLDE CHROME LINED BARRELS CRITERION BARRELS INC
    $269.99

    Item Code: #453217907

    Availability: In stock

    Chrome-lined, button rifled barrels feature 223 Wylde chambers and 1-8" twist for enhanced accuracy potential with both .223 and 5.56 NATO ammunition. Unique chrome-lining process maintains uniformity throughout the bore and hand-lapping helps ensure smooth, consistent lands and grooves. Gas ports are optimized for barrel length and chambering to help ensure reliable cycling, and are available for carbine, mid-length, and rifle gas systems. Also features 1/2"-28 tpi muzzle threads for standard comps and flash hiders, plus M4 feed ramps on barrel extension to aid in smooth, reliable feeding. Barrels now feature a dimple opposite the gas port, so screw-on gas blocks do not shift during firing. Hybrid contour barrels have a reduced and tapered contour under the handguard to save weight. HBAR contour barrels feature .870" diameter under the handguard for rigidity and extra heat absorption.

    AR-15, Issue:11, Page:019 Big Book Catalog, Issue:69, Page:018 Sinclair, Issue:5B, Page:249
  • AR-15 ENHANCED MILITARY-STYLE TRIGGERS ALG DEFENSE
    $49.00 - $69.00

    Item Code: #453217907

    Availability: In stock

    Gives A Smoother Pull While Preserving Reliability Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. These are “enhanced standard” triggers, so the armorer continues to work with the configuration he’s accustomed to. The QMS (Quality Mil-Spec) set has the sear contact surface precision-honed to smooth and lighten the pull to around 6½ lbs. The ACT (ALG Combat Trigger) adds nickel-boron coating on the trigger and nickel-Teflon coating on the hammer, disconnnector, and pins to increase surface hardness and reduce friction, with an average pull weight of about 6 lbs.

    AR-15, Issue:11, Page:027 Big Book Catalog, Issue:69, Page:026 Sinclair, Issue:5B, Page:255
  • AR-15 .154" DIA. NON-ROTATING PINS KNS PRECISION, INC.
    $29.99

    Item Code: #453217907

    Availability: In stock

    Precision-Machined To Upgrade Your Existing Hammer & Trigger Pins Identical function as the standard sets listed above, but with ultra-low-profile links that protrude even less above the receiver. Available with standard .154" diameter pins, oversized .155" pins, or .170" pins for large-pin receivers.

    AR-15, Issue:11, Page:030 Big Book Catalog, Issue:69, Page:028
  • AR-15/M16 ACS™ BUTTSTOCK MAGPUL
    $85.45

    Item Code: #453217907

    Availability: In stock

    Drop-In Replacement For M4 Stock With Storage & Enhanced Comfort Features Adaptable Carbine/Storage (ACS) stock is a drop-in replacement for standard USGI M4 collapsible stock that gives the tactical operator extra storage options, a secure, comfortable cheekweld, and an advanced dual-locking lever. Smooth, streamlined exterior contours prevent snagging on clothing, sling, or vegetation, and help ensure fast exits from vehicles without snagging on gear. Removable battery storage compartments run the full length of the extra-wide comb and hold 2 AA or 3 CR-123 batteries, while providing a wide, contoured area for an exceptionally solid, comfortable cheekweld. Secure molded rubber caps keep water and dust out of compartments and face the rear of the stock for easy removal; cap exterior is beveled to resist snagging when shouldering weapon. Positive-locking trapdoor on right side of the stock reveals a roomy storage compartment for additional batteries, coiled up cleaning cable and other cleaning supplies, ear plugs, spare parts, or other small items. Magpul’s dual locking system uses an additional cam lever to protect the release lever from accidental operation, yet still allows you to adjust length of pull by simply pushing on the release lever. Slot molded in the toe provides an attachment point for a 1¼" wide sling. Also includes the same detachable rubber buttpad found on Magpul CTR and UBR buttstocks to help keep stock firmly mounted on shoulder. Mil-Spec fits 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec tubes that accept both four- and six-position collapsible stocks.

    AR-15, Issue:11, Page:045 Big Book Catalog, Issue:69, Page:045
  • AR .308 PRS STOCK COLLAPSIBLE A2 LENGTH MAGPUL
    $242.25

    Item Code: #453217907

    Availability: In stock

    Fully adjustable stock and comb for AR-Style .308 rifles readily adapts length of pull and comb height with two click-detent adjustment wheels. Drop-in installation on rifles with standard A1/A2 fixed buffer tubes without A2 spacer. Rubber buttpad seats securely onto your shoulder and won’t slip during sustained shooting exercises. Fully-raised comb will not get in the way of charging handle operation. Removable base cover conceals an accessory rail to provide a mounting platform for a monopod. Removable sling loops can be mounted on either side of stock to accommodate your preferred carry position. Get the PRS Stock QD Sling Adapter to use with your PRS stock.

    AR-15, Issue:11, Page:046 Big Book Catalog, Issue:69, Page:045 Sinclair, Issue:5B, Page:250
  • AR-15/M16 223 WYLDE MATCH BARRELS WHITE OAK ARMAMENT
    $269.99

    Item Code: #453217907

    Availability: In stock

    Wylde Chamber Helps Maximize Performance With .223 Or 5.56 Ammo Precision-machined stainless steel barrels feature a .223 Wylde chamber that helps maximize the long-range performance of your AR-15 with both .223 Remington and 5.56x45mm NATO ammunition. With 6-groove, 1-7" button rifling for accuracy and M4-type feed ramps for reliable feeding, these barrels help you reach out to distant targets with issued or magazine-length ammunition. The 18" barrels offer the Special Purpose Rifle (SPR) profile designed to optimize accuracy out to 600 meters, and are available with Mid-Length or Rifle-Length gas systems. SDM barrel features a heavy, fluted profile under the handguards, for added strength and rigidity.  Threaded muzzle accepts a variety of compensators or flash suppressors.

    AR-15, Issue:11, Page:020 Big Book Catalog, Issue:69, Page:020 Sinclair, Issue:5B, Page:249
Scroll