Optic Accessories

  • grid
  • list
  • LASERSHOOTER PRACTICE SHOOTING SYSTEM ROBERT LOUIS COMPANY
    $249.99

    Item Code: #453217907

    Availability: In stock

    Using the Red Laser shooter to enhance the gun fitting procedure is the best way to ensure accurate gun fit. Simple to use it is put into the gun barrel ( any choke including screw in chokes) and a finger ring is placed on the trigger finger of the shooter. When the trigger is touched the laser is fired. The shooter can mount his gun as he would normally and then aim and fire at the supplied target. The results will be obvious to both the shooter and fitter without guessing and adjustments will be made to set up the shotgun stock or rib so that the shooter is aiming where the gun is pointing. This Laser shooting is similar to patterning the gun with live ammo and just as accurate. No gun fitter should be without the Red Laser Shooter to ensure that a fitting session ends with a satisfied customer. FEATURES: Includes red lasershooter with inserts for four gauges Inserts include 12ga, 20ga, 28ga, and 410 Laser is activated via trigger attachment, shooting when trigger is touched Aluminum construction Packaged in handy blue carrying case Includes 3 lr44 batteries BENEFITS: Immediate feedback to the shooter as to where the shotgun is shooting Allows for the shooter/gunsmith to quickly identify where adjustments need to be made Allows for quick identification of barrel convergence on double barreled guns Helps the shooter improve their aiming abilities The 12ga. insert works for 10ga. and the 20ga. fits a 16ga.

  • SWITCHVIEW MODEL #1930SV2 MGM TARGETS
    $59.95

    Item Code: #453217907

    Availability: In stock

    Switchview Model fits Vortex Viper Gen II w/ metal magnification rings. Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation.

    Big Book Catalog, Issue:69, Page:279 Sinclair, Issue:5B, Page:213
  • SWITCHVIEW MODEL #1290SV2 MGM TARGETS
    $59.95

    Item Code: #453217907

    Availability: In stock

    Switchview Model 1290SV2 fits Leupold VX-II model scopes. Leupold Mark AR model scopes. Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation.

    Big Book Catalog, Issue:69, Page:279 Sinclair, Issue:5B, Page:213
  • MARK 4 TACTICAL SCOPE COVERS LEUPOLD
    $29.99

    Item Code: #453217907

    Availability: In stock

    Keep your Leupold® riflescope looking like new. Protect its finish from dirt and damage with a scope cover. Available in many sizes to fit most Leupold scopes, the scope cover is made of water-resistant, nylon-laminated neoprene. Protect your scope in storage or in the field.

  • EOTECH ADJUSTMENT DECALS MICHIGUNS
    $9.99

    Item Code: #453217907

    Availability: In stock

    Elevation & Windage Calibrated Decals For Fast AdjustmentsCalibrated decals are placed on the outside of the EOTech protective housing, around the elevation and windage knobs to allow fast, precise sight adjustments on distant targets. Large, easy to see arrows avoid confusion by pointing in the direction of turn to change elevation and windage. Transparent with tan colored lettering and markings that are easy to see. Each calibrated “tic” mark is the equivalent of ½" of bullet point-of-impact at 100 yards. Constructed of waterproof, high-strength vinyl, with an adhesive backing that holds tight. AR-15, Issue:11, Page:098 Big Book Catalog, Issue:68, Page:287
  • 511/512/551/552 PROTECTIVE HOOD EOTECH
    $32.00

    Item Code: #453217907

    Availability: In stock

    Genuine factory replacement parts fit perfectly and help you keep your EOTech sight running like new. Aluminum Protective Hoods for 511/512/551/552 series and model 553 are available in matte black. Hood installation requires the four, T-15 Torx®-head screws in the Hood Mounting Screw Kit, available separately.

    AR-15, Issue:11, Page:098 Big Book Catalog, Issue:69, Page:267
  • ALUMINA POST-2004 SUNSHADE LEUPOLD
    $38.99

    Item Code: #453217907

    Availability: In stock

    Protect the riflescope objective lens from rain and glare. The Alumina Lens Shades can be threaded together to create custom lengths. Fits most Leupold riflescopes, make sure to order the correct objective size and model year to match your scope.

    Sinclair, Issue:5B, Page:175
  • STRIKEFIRE RED DOT KILLFLASH ARD VORTEX OPTICS
    $34.99

    Item Code: #453217907

    Availability: In stock

    Reduce objective lens glare and reflection on any threaded StrikeFire red dot scope with this compact, anti-reflection device (ARD). In addition to reducing reflection, the killFLASH Threaded ARD protects the len from scratches and damage. The killFLASH Threaded ARD will only fit StrikeFire red dot scopes with threaded objective lens barrels (shown at right). Choose the killFLASH ARD (Flip Cap) for StrikeFire models without threaded objective lens barrels.

  • MACKS LENS WIPES MCKEON PRODUCTS, INC.
    $1.39 - $5.99

    Item Code: #453217907

    Availability: In stock

    These lens wipes are perfect to carry in your range box, glove box, golf bag or pocket. The premoistened, anti-fog, anti-static wipes will do a great cleaning job on glasses, scopes, binoculars or any optical equipment. Safe for all glass or plastic optics and will not harm lens coatings. Wipes are individually wrapped for long storage life. We have been using wipes like these at matches for some time, and they address the dirty glasses problem perfectly and conveniently.

    Sinclair, Issue:5B, Page:022 Sinclair, Issue:5B, Page:214
  • LENS CLEANING KIT OTIS
    $12.99

    Item Code: #453217907

    Availability: In stock

    Helps Keep All Your Optics Clean & Fog-FreeAll-in-one kit helps you protect and preserve the functionality of your optics, so you can see the target clearly. Includes the necessary components to remove oil, dirt, and dust from glass and optics-grade carbonate, leaving it resistant to fogging and further dust contamination. Use to clean lenses on scopes, rangefinders, laser sighting devices, binoculars, cameras, and eyeglasses without damage or scratching.

    AR-15, Issue:09, Page:092 Big Book Catalog, Issue:69, Page:279
  • SIGNATURE POS-ALIGN OFFSET GUNSMITH KIT BURRIS
    $84.99

    Item Code: #453217907

    Availability: In stock

    By utilizing Pos-Align Offset Inserts in Signature Rings, you can virtually sight-in your gun without moving the scope adjustments. By keeping the internal optics centered, you'll see through the scope all of the clarity, sharpness, and brightness that the optics designers intended for you to see. The offset inserts also correct for any misalignment caused by receiver holes drilled off center, or the bases or rings being slightly off perfect center. And for you 1000-yard shooters, the need for expensive tapered bases or shimming becomes a hassle and expense of the past. Gunsmith Kit includes 10 sets of each .005", .010", .020" inserts (60 total pieces).

    Big Book Catalog, Issue:69, Page:252
  • ANGLE COSINE INDICATOR MOUNT GEN I BADGER ORDNANCE
    $59.99 - $179.99

    Item Code: #453217907

    Availability: In stock

    Machined Aluminum mount allows you to mount the Sniper Tool Designs Angle Co-Sine Indicator (ACI) directly to your MIL STD 1913 mount. Attaches with 2 soft point set screws so it will not mar your mount. Also Fits M16/AR-15 flat top rifles. Mil Spec Anodized Hard Coat Type III, Black. Mounts the ACI below rail.

  • CR 2032 BATTERIES STARRETT
    $9.99

    Item Code: #453217907

    Availability: In stock

    Starrett CR 2032 replacement batteries for us in electronic calipers, micrometers and optics. Batteries cannot be shipped outside of the U.S. These may only ship UPS Ground within the continental United States.

    Big Book Catalog, Issue:69, Page:271 Big Book Catalog, Issue:69, Page:445 Sinclair, Issue:3A, Page:040
  • SCOPE LEVER 3GUN STUFF.COM
    $69.99

    Item Code: #453217907

    Availability: In stock

    Makes manipulation of the power on variable powered optics much easier Pending hinge design reduces the clearance needed between scope and mount Textured handle enhances the grip Low profile design reduces the chances of other gear snagging on the lever Big Book Catalog, Issue:68, Page:300 Sinclair, Issue:5B, Page:213
  • MARK 6 THROW LEVER LEUPOLD
    $149.99

    Item Code: #453217907

    Availability: In stock

    The Mark 6 throw lever is an accessory designed to allow the scope user to quickly and easily manipulate the power selector ring on the Mark 6 family of scopes.

  • MICRO LENS COVER AIMPOINT
    $19.00

    Item Code: #453217907

    Availability: In stock

    Replace a lost or broken lens cover with the factory original part that came with your Aimpoint. Protect your sight’s lenses from rain, snow, dust and impact. Micro - One-piece, rubber, "bikini"-style cover for Micro series sights.

    AR-15, Issue:11, Page:097 Big Book Catalog, Issue:69, Page:266
  • SCOPECOAT SCOPECOAT
    $39.99

    Item Code: #453217907

    Availability: In stock

    Protect your valuable scope with the Scopecoat. The Scopecoat Cover stretches over your scope shielding the entire scope from dust, dirt, moisture, dings, and scratches. The Scopecoat is constructed of high quality Neoprene laminated with nylon. The Neoprene has a 5 percent moisture absorbency, which takes moisture away from the scope. Available in black only. NOTE: The XP-6 is available for tall turret scopes such as Law Enforcement, Benchrest and Varmint scopes. Unique to the XP-6 is the 6mm thickness (3 times the normal Scopecoat thickness) for extra protection. Scopes have a way of bumping into other guns in the safe and the Scopecoat protects the scope and your other guns.

    Sinclair, Issue:5B, Page:214
  • ALUMNI COMPETITION SERIES SUNSHADE LEUPOLD
    $38.99

    Item Code: #453217907

    Availability: In stock

    Protect the riflescope objective lens from rain and glare. The Alumina Lens Shades can be threaded together to create custom lengths. Fits most Leupold riflescopes, make sure to order the correct objective size and model year to match your scope.

    Sinclair, Issue:5B, Page:175
  • OPTICAL CLEANING KIT NIGHTFORCE
    $19.00

    Item Code: #453217907

    Availability: In stock

    The Nightforce Optical Cleaning Kit is necessary companion for your Nightforce riflescope. It is packaged in a convenient, reliable carrying case. The kit contains all of the items needed to professionally care for the lenses of your riflescope. Included is a quality, retractable, ultra-soft bristled brush to remove large particles. It also comes with a scientifically formulated, non-degrading, lens cleaning fluid that works in harmony with the coatings on the lenses. Finally, the kit contains the industry's best split micro-fiber cloth that works better than any material currently on the market. The cloth is static free and can be washed and reused multiple times. (Do not use fabric softener while washing the cloth)

    Sinclair, Issue:5B, Page:214
  • SCOPE INSTALLATION STORAGE CASE UFP TECHNOLOGIES
    $33.99

    Item Code: #453217907

    Availability: In stock

    Keep your scope installation tool protected and together with out Scope Installation Storage Case. This case will store and protect both our 1" and 30mm Scope Ring Lapping Tools, one Lapping Tool Handle, one container of our lapping compound and one set of Sinclair Scope Alignment Tools. **Image is shown with tools in the storage case for illustrative purposes only. Tools are not included with the purchase of Storage Case only.

    Sinclair, Issue:5B, Page:215
  • SWITCHVIEW MODEL #1819SV2 MGM TARGETS
    $59.95

    Item Code: #453217907

    Availability: In stock

    Switchview Model 1819SV2 fits Bushnell HDMR 3.5-21, Burris M-Tac 1-6. Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation.

    Big Book Catalog, Issue:69, Page:279 Sinclair, Issue:5B, Page:213
  • LENSPEN BURRIS
    $7.99

    Item Code: #453217907

    Availability: In stock

    Burris Lenspen

  • JPOINT SHIMS J P ENTERPRISES
    $23.70

    Item Code: #453217907

    Availability: In stock

    •Installs between mount and sight to provide protective wings.•JPoint mount adapter for Novak fixed sight cut.•JPoint mount adapter for Ruger "P" series center fire pistol and Ruger MK11 series pistol.•JPoint mount adapter for Sig centerfire pistol with fixed rear sight.•JPoint mount adapter for Picatinny/Weaver interface with integral guard wings.•Matt Burkett JPoint offset mount with guard wings for rail mounting. Does not include JPoint sight.•Set of 8 reversable 1 degree shims for adjusting angle or height of JPoint sight.

  • MAXIMIZED SCOPE RING REDUCERS BADGER ORDNANCE
    $29.49

    Item Code: #453217907

    Availability: In stock

    Ring reducers convert Badger Ordnance Maximized Scope Rings from 30mm to 1".

    AR-15, Issue:06, Page:076 Big Book Catalog, Issue:69, Page:252 Sinclair, Issue:5B, Page:210
Scroll