Optic Accessories

  • grid
  • list
  • EOTECH 511/512/551/552 LENS COVER MODULE GG&G, INC.
    $36.79

    Item Code: #453217907

    Availability: In stock

    Protects The Lenses From Weather & Damage; Flips Open Instantly Flexible rubber body with spring-loaded, ABS plastic covers help seal out dirt, dust and moisture to keep the lens surfaces of your EOTech holographic sight clean, scratch-free, and ready for use in all shooting conditions. Tabs on the right and left sides of the covers allow a fast, ambidextrous flip-open action with thumb or finger pressure. Front cover opens to near horizontal position to help block rain or sunlight. Rear cover folds back on top of the EOTech’s protective hood to ensure an unobstructed view through the sight. Body section installs under the EOTech protective hood, so it’s not even visible. Noise-absorbing neoprene pads dampen the sound of the rear lens cover contacting the hood during covert operations.

    AR-15, Issue:11, Page:096 Big Book Catalog, Issue:69, Page:268
  • SWITCHVIEW 167-171SV1 MGM TARGETS
    $59.95

    Item Code: #453217907

    Availability: In stock

    Enables Fast & Easy Changes In Scope Magnification Setting Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation. 167-171SV1 fits Nightforce NXS full size scopes, Sworavski Z5, Vortex  Viper PST riflescopes with rubber magnification rings, Viper HS riflescopes with rubber magnification rings and other scopes with similar dimensions.  To be sure of the model/generation of scope you have, measure the magnification ring diameter.

    Big Book Catalog, Issue:69, Page:279 Sinclair, Issue:5B, Page:213
  • TL THROW LEVER SWAROVSKI
    $98.95

    Item Code: #453217907

    Availability: In stock

    The TL throw lever is a magnification lever for the Z8i, Z6(i) and X5(i) rifle scopes. This special accessory is seamlessly integrated into the overall design and allows you to adjust the magnification easily and quickly.

  • ANGLE COSINE INDICATOR MOUNT GEN II BADGER ORDNANCE
    $59.99 - $179.99

    Item Code: #453217907

    Availability: In stock

    Machined Aluminum mount allows you to mount the Sniper Tool Designs Angle Co-Sine Indicator (ACI) directly to your MIL STD 1913 mount. Attaches with 2 soft point set screws so it will not mar your mount. Also fits M16/AR-15 flat top rifles. Mil Spec Anodized Hard Coat Type III, Black. Mounts the ACI Above the rail.

    AR-15, Issue:04, Page:063 Big Book Catalog, Issue:69, Page:369
  • SCOPLEVEL SCOPLEVEL
    $19.99 - $27.95

    Item Code: #453217907

    Availability: In stock

    Don't Let A Tilted Gun Ruin AccuracyMount this fold-away level on your scope tube and be certain the crosshairs are as carefully aligned as they were when you sighted in. Just a slight amount of tilt can throw a shot off-target and the longer the range, the worse the error. The Scoplevel is visible just above the reticle where your sighting eye can check it easily before every shot. Big Book Catalog, Issue:69, Page:278
  • VCOG ARD & FLIP CAP TRIJICON
    $165.00

    Item Code: #453217907

    Availability: In stock

    This anti-reflective device is made of aluminum and threads into the objective end of the VCOG™ sight for a secure fit. The killFlash and Objective Flip Cap is specifically designed to fit together and rotate easily to a preferred position. The caps flip open and "lock" into position, out of the way. Product includes: Objective Flip Cap Anti Reflection Device Ocular Flip Cap Ocular Flip Cap Adapter

    AR-15, Issue:11, Page:101 Big Book Catalog, Issue:69, Page:276
  • SURE FIT RIFLESCOPES COVERS VORTEX OPTICS
    $19.99

    Item Code: #453217907

    Availability: In stock

    SURE FIT RIFLESCOPE COVER Protect your scope from the elements with a durable water and weatherproof SURE FIT cover. This stretch cover is easy to put on and keeps your scope clean from dirt, dust, and debris.

  • EOTECH XPS2 & XPS3 LENS COVER MODULE GG&G, INC.
    $41.99

    Item Code: #453217907

    Availability: In stock

    Flexible rubber body with spring-loaded, ABS plastic covers help seal out dirt, dust and moisture to keep the lens surfaces of your EOTech holographic sight clean, scratch-free, and ready for use in all shooting conditions. Tabs on the right and left sides of the covers allow a fast, ambidextrous flip-open action with thumb or finger pressure. Front cover opens to near horizontal position to help block rain or sunlight. Rear cover folds back on top of the EOTech’s protective hood to ensure an unobstructed view through the sight. Body section installs under the EOTech protective hood, so it’s not even visible. Noise-absorbing neoprene pads dampen the sound of the rear lens cover contacting the hood during covert operations.

    AR-15, Issue:11, Page:096 Big Book Catalog, Issue:69, Page:268
  • COLLIMATOR EXTENSION ALLEY SUPPLY/SWEENY SITEALINE
    $34.99

    Item Code: #453217907

    Availability: In stock

    Boresight "Tall" Scopes EasilyGets the boresighter up high enough to align the scope on guns with see-through rings or integral mounts (like the AR-15) that sit high above the bore. Three parallel "V"s give a range from 1" to 2-3/8" between the bore spud and the collimator spud. Tilt for offset mounts. Accepts Sweeny Site- A-Line, Redfield or Tasco spuds. Big Book Catalog, Issue:69, Page:465
  • SUNSHADE W/HONEYCOMB ARD US OPTICS, INC
    $76.00 - $80.75

    Item Code: #453217907

    Availability: In stock

    An ARD is used for two different purposes, to block stray light rays from entering the objective lens, and to reduce the reflection signature from the glare of the objective lens. U.S. Optics uses a 0.250" aluminum honeycomb that is 1" thick, then installed into a sunshade to accomplish the job.

  • LASER BORE SIGHT WITH EXTERNAL BATTERY BOX AIMSHOT
    $41.99

    Item Code: #453217907

    Availability: In stock

    Longer battery life for your bore sighting needs. The external battery box extends your battery life to 28 hours. The battery box doubles as a storage container for the bore site. Integrated Magnet lets you stick the battery box to you rfirearms while you sight in. Comes with a compact high quality nylon pouch to store and transport all of your boresights and arbors. Bore sight made from 100% brass for the highest quality and durability possible. .223 20X model available for long range shooters.

  • RUBBER LENS CAPS NIGHTFORCE
    $16.00 - $45.00

    Item Code: #453217907

    Availability: In stock

    These rubber lens caps slip over lenses of your Nightforce scope. Each set contains an ocular and objective lens cover. Keep your glass in great shape with these inexpensive lens covers.

  • TENEBRAEX KILLFLASH® ARD AIMPOINT
    $45.00

    Item Code: #453217907

    Availability: In stock

    Anti-Reflection Device screws into front lens opening of 9000SC and Comp series sights. Unique, honeycomb pattern filter disperses light to prevent reflections from front lens giving away your position without adversely affecting sight picture. Fits under the lens cover without modification.

    AR-15, Issue:11, Page:097 Big Book Catalog, Issue:69, Page:266
  • SWITCHVIEW 1360SV2 MGM TARGETS
    $59.95

    Item Code: #453217907

    Availability: In stock

    Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation. 1360SV2 fits Leupold VX-3 non-illuminated reticle model scopes, Leupold Mark IV non-illuminated reticle model scopes, Cabela's MT-II 3-9x40 scopes. Mueller APV model scopes. Redfield Revolution 3-9x40 scope, Simmons AETEC 2.5-8X44 model scopes, Thompson Center Encore 2.5-7X32 model scopes, Weaver  Grand Slam Tactical 8-10x40 model scopes, Other scopes with similar dimensions, Redfield's scope measures 1.320" which is a .040" different than the Switchview's 1.360". To insure a snug fit, we recommend inserting a small strip of bicycle innertube between the scope ring and the bottom half of the Switchviwe lever.

    Big Book Catalog, Issue:69, Page:279 Sinclair, Issue:5B, Page:213
  • SWITCHVIEW MODEL # 1650SV2 MGM TARGETS
    $59.95

    Item Code: #453217907

    Availability: In stock

    Switchview Model fits Schmidt & Bender Short Dot 1.1-4x20, 1.5-6x20, 5x25 model scopes and Zeiss Compact Victory (Not Diavari) model scopes. Aluminum lever clamps around your model scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation.

    Big Book Catalog, Issue:69, Page:279 Sinclair, Issue:5B, Page:213
  • SCOPE TOOLS LEUPOLD
    $8.99 - $16.99

    Item Code: #453217907

    Availability: In stock

    These three tools from Leupold will enable you to mount almost all bases and rings with ease. The Ring Wrench is the ideal tool for turn in style rings, and the Torx Driver fits most of the Torx screws used on newer rings. The handy and compact Leupold Mounting Tool includes 2 Torx drivers, 5 hex head drivers and a slotted screwdriver. All the drivers fold into the compact tool body.

    Big Book Catalog, Issue:69, Page:463 Sinclair, Issue:5B, Page:021 Sinclair, Issue:5B, Page:175
  • SWITCHVIEW 1655SV2 MGM TARGETS
    $59.95

    Item Code: #453217907

    Availability: In stock

    Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation. 1655SV2 fits BUSHNELL ELITE 4200 model scopes with illuminated reticle. GRSC 1x6 CRS model scopes. Mueller APT model scopes. NIKON M223 (To be sure of the model/generation of Nikon scope you have, measure the magnification ring diameter. The Switchview you may need is the 1740SV2N3V1) Weaver Classic Extreme 1.5x4.5x24 model scopes. US OPTICS SN-4 model scopes. Zeiss Conquest model scopes. Other scopes with similar dimensions.

  • 1913 MIL-SPEC ANGLE DEGREE INDICATOR MOUNT NIGHTFORCE
    $58.99

    Item Code: #453217907

    Availability: In stock

    Mount fits both right-hand and left-hand AD

    Big Book Catalog, Issue:69, Page:279 Sinclair, Issue:5B, Page:212
  • SITE-A-LINE SPUDS ALLEY SUPPLY/SWEENY SITEALINE
    $15.99

    Item Code: #453217907

    Availability: In stock

    Chrome-plated, precision-ground spuds have hardened bronze springs.

    Big Book Catalog, Issue:69, Page:465
  • RING INSERTS A.R.M.S.,INC
    $35.00

    Item Code: #453217907

    Availability: In stock

    Offers A Solid, Easy To Attach System To Mount Optical SightsThe A.R.M.S. #36 Ex OSR SWAN Sleeve offers a solid, easy to attach system to mount optical sights. Its straightforward design offers external mounting and is finished in non-reflective black. Side screws adjust mounting tension offering a solid platform while the upper rail keeps optics attached firmly and in perfect alignment.

  • VIPER SUNSHADES VORTEX OPTICS
    $29.99 - $34.99

    Item Code: #453217907

    Availability: In stock

    Reduce glare and sun reflections off the objective lens by adding a 4-inch sunshade to your 44mm Viper riflescope. This black anodized sunshade uses a screw-in assembly that attaches easily.

  • 511/512/551/552 MOUNTING HARDWARE EOTECH
    $22.00

    Item Code: #453217907

    Availability: In stock

    Mounting Hardware kit contains an Allen head cross-bolt and wrench, Weaver-style slotted mount bolt, plastic washer, and Weaver lock bar. Fits 511, 512, 551, 552 sights only.

    AR-15, Issue:11, Page:098 Big Book Catalog, Issue:69, Page:267
  • FLATLINE OPS TRUE BORE ADI/ACI SET-UP TOOL FLATLINE OPS, INC.
    $25.00

    Item Code: #453217907

    Availability: In stock

    Bubble level attaches to the muzzle crown tohelp you calibrate a Flatline Ops ADI, ACI, orother brand angle indicator. When the bubbleis between the lines, the barrel is absolutely level, so you know theindicator’s reading will be accurate. Sinclair, Issue:5B, Page:211
  • SWITCHVIEW 1615SV2 MGM TARGETS
    $59.95

    Item Code: #453217907

    Availability: In stock

    Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation. 1615SV2 fits Burris XTR 1-4x24, 1.5-6x40, 3-12x50, and 6-24x50 scopes, Burris Euro Diamond, XTR 1-4x24, 1.5-6x40, 3-12x50, 6-24x50 scopes, Bushnell Banner wide angle 3-9 scopes, Mueller 8-32x44TD scopes. Other scopes with similar dimensions.   Please note - Bushnell / Burris indicates XTR and Burris Euro Diamond are the same ring, but this has not been confirmed yet. If you have a Euro Diamond, please call before ordering.  

    Big Book Catalog, Issue:69, Page:279 Sinclair, Issue:5B, Page:213
Scroll