Neck Turning

  • grid
  • list
  • SINCLAIR NT-4000 PREMIUM NECK TURNING TOOL KIT W/STORAGE CASE SINCLAIR INTERNATIONAL
    $239.99

    Item Code: #453217907

    Availability: In stock

    Neck turning is a case prep operation that we and many of our customers find beneficial to top notch accuracy and easy to do with our tools. This neck turning kit includes our Deluxe Neck Turning Tool (NT-4000), neck expander die, stainless expander mandrel, carbide turning mandrel, handle and our storage case with cutouts for nearly all Sinclair neck turning accessories. Everything needed to get started in neck turning.

    Sinclair, Issue:5B, Page:018
  • SINCLAIR CARBIDE TURNING MANDRELS SINCLAIR INTERNATIONAL
    $49.99

    Item Code: #453217907

    Availability: In stock

    Sinclair stainless steel neck turning mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002" under bullet diameter. The shape and surface of all of our mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbide stock, which yields even closer tolerances. All Carbide mandrels are ground to .002" under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Body and the NT-5000 Turning Tool.

    Sinclair, Issue:5B, Page:019
  • SINCLAIR GENERATION II EXPANDER DIES SINCLAIR INTERNATIONAL
    $24.99 - $49.99

    Item Code: #453217907

    Availability: In stock

    Our Generation II Expander Dies completely capture the mandrel within the die so the mandrel cannot pull out. An O-ring in the die cap allows the mandrel to float a bit and find its own center within the case neck. All three Generation II dies are precision machined from stainless steel and the 7/8 inch - 14 dies include the Sinclair Stainless Steel Split Lock Ring. Large caliber expander dies accept only 35 to 50 caliber mandrels. All expander mandrels for Sinclair Expander Bodies are sold separately: Find Mandrels here.

    Sinclair, Issue:5B, Page:017
  • SINCLAIR EXPANDER MANDREL - OVERSIZED SINCLAIR INTERNATIONAL
    $9.99

    Item Code: #453217907

    Availability: In stock

    Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body). Sinclair, Issue:5B, Page:019
  • SINCLAIR PREMIUM NECK TURNING KIT SINCLAIR INTERNATIONAL
    $219.99

    Item Code: #453217907

    Availability: In stock

    Out NT-4000 Premium Neck Turning Tool is the finest, easiest to adjust, and most accurate hand neck turning tool available. It's ergonomic design makes it the most comfortable to turn with as well. Our Premium Neck Turning Tool employs and eccentric mechanism for quick cut depth adjustments which are accurate to .00025 with our carbide mandrels. The audible click cutter adjustment knob is laser engraved and moves the cutter in either direction with a total adjustment range of .004 to .005 inches. The Premium Neck Turning Tool comes with three laser engraved feeler gages which may be used to quickly set the cutter depth to the approximate range of the cut desired. With the cutter in range using the supplied feeler gages, the eccentric adjustment knob enables the user to make the final depth adjustment to the exact thickness desired. Our standard neck turning tool has served thousands of handloaders for over two decades. This tool comes complete with our stainless steel universal handle, cutter, and allen wrenches. The neck turner cutter is made from hand-stoned high-speed tool steel and will cut thousands of cases before needing replacement. Each tool requires the use of our Sinclair mandrels. Our Premium Neck Turning Kits include the NT-4000 Neck Turner, our Generation II Expander Die (05-3000), a Carbide Neck Turning mandrel and a Stainless Steel Expander Mandrel. The Carbide mandrel is precision ground from solid carbide stock which yields even closer tolerances. The Expander mandrel is turned from high grade stainless steel on precision turning centers. The Expander mandrel is sized .001 under bullet diameter and the Carbide Turning mandrels are .002 below bullet diameter. This allows for the perfect fit to avoid galling the inside of your cases during the turning process. For additional technical information regarding neck turning, please feel free to call our 800 number and speak to any of our reloading technicians. Sinclair, Issue:5B, Page:018
  • SINCLAIR PREMIUM NECK TURNING TOOL W/ HANDLE SINCLAIR INTERNATIONAL
    $139.99 - $149.99

    Item Code: #453217907

    Availability: In stock

    We feel our NT-4000 Premium Neck Turning Tool is the finest, easiest to adjust, most accurate and comfortable to use hand neck turning tool available. Our Premium Tool employs an eccentric mechanism (not an eccentric mandrel) for quick cut depth adjustments which are accurate to .0001 inch with our carbide mandrels. The click adjustable cutter adjustment knob moves the cutter in either direction in .0002 inch to .00025 inch per click increments. Depth of cut can be adjusted a total of .004-.005 inch using the laser engraved adjustment knob. The Premium Tool comes with three laser marked feeler gages which are used to quickly set the cutter depth to the approximate range of the cut desired, and a mandrel adjustment screw is included to make mandrel set up and adjustment easier. with the cutter in range using the feeler gages, the eccentric adjustment knob will make final adjustment for the exact cut thickness you desire. Cutter adjustment is very fast and sure with none of the usual trial and error experienced with other tools. The ergonomic shape of the tool body makes it very comfortable to use and much less fatiguing over a long neck turning session.

    Sinclair, Issue:5B, Page:017
  • SINCLAIR DRIVER & CASEHOLDERS SINCLAIR INTERNATIONAL
    $14.99 - $29.99

    Item Code: #453217907

    Availability: In stock

    The Sinclair Driver and Caseholder system is designed to hold and turn your case while you are neck turning, cleaning case necks or case mouth deburring. The caseholders and driver are machined from stainless steel, and the driver has a ¼" hex shaft for use in power screwdrivers or low speed drill motors. The driver is universal to the Sinclair system and will work with all the caseholders. Our Universal Caseholder enables you to use this system with our Sinclair Stainless Shell Holders listed on page 29. Select the appropriate shell holders for your favorite cartridges.. The Universal Caseholder works with the same #05-200 driver as our original caseholders, and it is available as a “kit” with the Driver and Universal Caseholder or individually for those who already have a driver. Remember to order the Sinclair Stainless Shell Holders for your Universal Caseholder if you don’t already have them. This system is a great, inexpensive way to speed up the neck turning process. Also works great for many other case prep operations.**NOTE: When ordering case holders, you will need to order a case holder driver as they are sold separately.**

    Sinclair, Issue:5B, Page:020
  • SINCLAIR NECK TURNING MANDREL SINCLAIR INTERNATIONAL
    $9.99

    Item Code: #453217907

    Availability: In stock

    Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool. Sinclair, Issue:5B, Page:019
  • LOCK-N-LOAD NECK TURNING TOOL HORNADY
    $111.99

    Item Code: #453217907

    Availability: In stock

    The new Hornady® Neck Turn Tool saves hand loaders time and effort at the workbench. Designed for use on a wide variety of case lengths, the Hornady® Neck Turn Tool allows for the use of a cordless drill to make neck turning faster and easier, while providing superior consistency and surface finish. An adjustment knob enables the user to choose detents for .0005” adjustment increments, or no detents for infinite adjustment. Each neck turn tool will come with a 22 cal, 6mm, 6.5mm, and 30 cal mandrel. The Hornady® Neck Turn tool is a winning solution for precision hand loaders who want to maximize their case care productivity.

  • HAND NECK TURNER W/ QUICK CHANGE CASE HOLDER RCBS
    $61.99

    Item Code: #453217907

    Availability: In stock

    RCBS offers a hand operated neck turner and two models of case trimmer attached neck turners. The hand neck turner includes a micrometer adjuster which can be zeroed to the mandrel and dialed for cut thickness. RCBS mandrels for the hand neck turner are available in 17 through 50 caliber, and the turner kit includes the unique Quick Change Case Holder which fits all case sizes. For selection of required Hand Case Neck Turner Pilots.

    Sinclair, Issue:5B, Page:019
  • SINCLAIR CASEHOLDER DRIVER SINCLAIR INTERNATIONAL
    $13.99

    Item Code: #453217907

    Availability: In stock

    The Sinclair Driver and Caseholder system is designed to hold and turn your case while you are neck turning,cleaning case necks or case mouth deburring. The Caseholders and Driver are machined from stainless steel, and the driver has a one fourth hex shaft for use in power screwdrivers or low-speed drill motors. The driver is universal to the Sinclair system and will work with all the Caseholders. Our universal Caseholder enables you to use this system for any cartridge case which has a Lee Auto Prime sheelholder available for it. The Universal Caseholder works with the same #05-2500 drivers as our original caseholders, and it is available as a kit with the Driver and Universal caseholder or individually for those who already have a driver. Remember to order a Lee Auto Prime shellholder for your Universal Caseholder if you don't already have one. The Sinclair Driver and Caseholder system and a Sinclair Neck Turning Tool takes the hard work out of neck turning using either the Sinclair Power center or a power screwdriver. Holding the neck tuner in one hand and power screwdriver in the other negates the wobble in drive assembly of the screwdriver. This system is a great, inexpensive way to speed up the neck turning process. Also works great for many other case prep operations. Sinclair, Issue:5B, Page:008 Sinclair, Issue:5B, Page:020
  • SINCLAIR NT-1500 NECK TURNING TOOL KIT SINCLAIR INTERNATIONAL
    $119.99

    Item Code: #453217907

    Availability: In stock

    This NT1500 Neck Turning Kit includes all four of the basic tools necessary for successful neck turning. Kit includes our NT1500 Neck Turning Tool, a Generation II Expander Die, a Neck Turning Mandrel and an Expander Mandrel all at a discounted price. You can also purchase your neck turning tool kit with our Sinclair Storage Case (80-15XX). Sinclair, Issue:5B, Page:018
  • SINCLAIR DRIVER & CASEHOLDER SET SINCLAIR INTERNATIONAL
    $49.99

    Item Code: #453217907

    Availability: In stock

    The Sinclair Driver and Caseholder system is designed to hold and turn your case while you are neck turning, cleaning case necks or case mouth deburring. The caseholders and driver are machined from stainless steel, and the driver has a ¼" hex shaft for use in power screwdrivers or low speed drill motors. The driver is universal to the Sinclair system and will work with all the caseholders. Our Universal Caseholder enables you to use this system with our Sinclair Priming Tool Shell Holders. Select the appropriate shell holders for your favorite cartridges. The Universal Caseholder works with the same #749-002-109 driver as our original caseholders, and it is available as a “kit” with the Driver and Universal Caseholder, as a kit with the Sinclair Driver and the three most popular caseholders (#1, #3 & #4) included, or individually for those who already have a driver. Remember to order the Sinclair Stainless Shell Holders for your Universal Caseholder if you don’t already have them. This system is a great, inexpensive way to speed up the neck turning process. Also works great for many other case prep operations.

    Sinclair, Issue:5B, Page:020
  • SINCLAIR MODEL 1000 NECK TURNING TOOL SINCLAIR INTERNATIONAL
    $49.99 - $59.99

    Item Code: #453217907

    Availability: In stock

    The Sinclair Model 1000 will uniform the wall thickness of your necks providing consistent bullet grip from case to case and allow the case neck walls to expand uniformly under pressure. This will help improve the consistency of each round and enhance your groups down range. Our standard neck turning tool has served the needs of thousands of handloaders for over two decades. This tool comes complete with our stainless steel universal handle (holds 22 Hornet up to the new magnums) and anodized aluminum neck turner body. The neck turning cutter is made from hand stoned high-speed tool steel and will cut literally thousands of cases before needing replacement. Neck turning tools require the use of Sinclair mandrels which are sold separately or as part of a complete neck turning tool kit.

    Sinclair, Issue:5B, Page:017
  • NT-1000 NECK TURNING KIT SINCLAIR INTERNATIONAL
    $89.99

    Item Code: #453217907

    Availability: In stock

    Our standard neck turning tool has served thousands of handloaders for over two decades. This tool comes complete with our stainless steel universal handle and cutter. The neck turner cutter is made from hand-stoned high-speed tool steel and will cut thousands of cases before needing replacement. Each tool requires the use of our Sinclair mandrels. Our NT-1000 neck Turning Kits include the NT-1000 Neck Turner, our Generation II Expander Die (05-3000), a Neck Turning mandrel and an Expander Mandrel. Both included mandrels are turned from high grade stainless steel on precision turning centers. The Expander mandrel is sized .001 under bullet diameter and the Turning mandrels are .002 below bullet diameter. This allows for the perfect fit to avoid galling the inside of your cases during the turning process. For additional technical information regarding neck turning, please feel free to call our 800 number and speak to any of our reloading technicians. Sinclair, Issue:5B, Page:018
  • HAND CASE NECK TURNER PILOT RCBS
    $10.99

    Item Code: #453217907

    Availability: In stock

    RCBS Hand Case Neck Turner Pilot Big Book Catalog, Issue:68, Page:530 Sinclair, Issue:5B, Page:015
  • SINCLAIR NT-1500 NECK TURNING TOOL KIT WITH STORAGE CASE SINCLAIR INTERNATIONAL
    $139.99

    Item Code: #453217907

    Availability: In stock

    This NT1500 Neck Turning Kit includes all four of the basic tools necessary for successful neck turning as well as the neck turning tool kit storage case. Kit includes our NT1500 Neck Turning Tool, a Generation II Expander Die, a Neck Turning Mandrel, Expander Mandrel and Sinclair Storage Case all at a discounted price. Sinclair, Issue:5B, Page:018
  • NECK TURNER PILOT FORSTER
    $10.29

    Item Code: #453217907

    Availability: In stock

    This neck turning attachment is used on the Forster Case Trimmer to turn concentric and uniform necks easily and accurately. Attachment includes carbide cutter, hand fed cam to control speed of cut, and mechanical stop to control length of cut. Works on Forster Case Trimmers only. This tool requires outside neck turning pilots for applicable caliber (cannot use trimmer pilots). Sinclair, Issue:5B, Page:019
  • .001 DIAL INDICATOR SINCLAIR INTERNATIONAL
    $29.99

    Item Code: #453217907

    Availability: In stock

    This dial indicator is dependable, a great value, and will provide great service to most reloaders. This is the work-horse indicator we provide with each of our measuring tools. Instant Indicators to use with Dial Indicator.

    Sinclair, Issue:5B, Page:031
  • OUTSIDE NECK TURNER ACCESSORIES FORSTER
    $14.99 - $38.99

    Item Code: #453217907

    Availability: In stock

    This neck turning attachment is used on the Forster Case Trimmer to turn concentric and uniform necks easily and accurately. Attachment includes carbide cutter, hand fed cam to control speed of cut, and mechanical stop to control length of cut. Works on Forster Case Trimmers only. This tool requires outside neck turning pilots for applicable caliber (cannot use trimmer pilots).

    Sinclair, Issue:5B, Page:019
  • SINCLAIR NT-1000 NECK TURNING TOOL KIT W/STORAGE CASE SINCLAIR INTERNATIONAL
    $109.99

    Item Code: #453217907

    Availability: In stock

    Neck turning is a case prep operation that we and many of our customers find beneficial to top notch accuracy and easy to do with our tools. This new neck turning kit includes our Standard Neck Turning Tool (NT-1000), neck expander die, stainless steel mandrels for both expanding and neck turning, handle and our storage case with cutouts for nearly all Sinclair neck turning accessories. Everything needed to get started in neck turning. Sinclair, Issue:5B, Page:018
  • SINCLAIR MODEL 1500 NECK TURNING TOOL SINCLAIR INTERNATIONAL
    $79.99 - $89.99

    Item Code: #453217907

    Availability: In stock

    Our customers havebeen asking for asmall, ergonomicallydesigned neckturning tool withfine cutting depthadjustment. TheNT-1500 answerson both counts. Ournewest neck turningtool’s ergonomic exterioris a slightly scaled downversion of our premium model and features fine (80 threads per inch)adjustment on the cutter depth screw. The adjustment screw is engravedwith hash-marks for easy fine-tune adjustment. Each mark on the adjustmentscrew corresponds to an approximate .001" change in cutting depth(.00104" to be exact), making it extremely easy to adjust well within.0005" of a specific neck wall diameter. Tool includes neck turning toolhandle and utilizes the same high speed tool steel cutter as our otherneck turning tools. Our NT-1500 is available in a kit, with or without storagecase, and as a stand-alone tool less the handle. Excepts all SinclairMandrels 17 thru 338. Sinclair, Issue:5B, Page:017
  • REPLACEMENT NECK TURNER CUTTER, 40 DEGREE SINCLAIR INTERNATIONAL
    $13.99

    Item Code: #453217907

    Availability: In stock

    We sell replacement cutters for our tools, but it is a very rare situation when one needs replaced. The 40 degree cutters are for handloaders turning case necks on improved cartridges. This replacement cutter works for the Sinclair Neck Turner model #NT-1000, #NT-1500, and #NT-4000 Premium Tool.

    Sinclair, Issue:5B, Page:017
  • HAND HELD OUTSIDE NECK TURNER FORSTER
    $14.99 - $65.99

    Item Code: #453217907

    Availability: In stock

    Forster's easy-to-use hand-held neck turning tool helps you take the next step toward cartridge-to-cartridge consistency. It features a carbide cutter with a micrometer-style adjustment knob for precise material removal to give cases consistent wall thickness that improves bullet-to-bore alignment. The aluminum holder retains the case firmly with a simple turn of the knob; holds up to .592" base diameter. Requires a pilot that's specific to the case mouth diameter; sold separately. Pilots are precision-ground .002" to .0025" smaller than the bullet diameter.

    Sinclair, Issue:5B, Page:020
Scroll