More...

  • grid
  • list
  • KAK SHOCKWAVE PISTOL BRACE PACKAGE KAK INDUSTRY LLC.
    $95.00

    Item Code: #453217907

    Availability: In stock

    Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture. Features: Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. Available in black and flat dark earth (this listing is for black) Quick and easy to install Provides additional support during firing Weighs a scant 5.0 ounces ATF approved for pistol use Veteran designed, engineered, marketed, and sold Made in U.S.A. Includes: Shockwave Blade Pistol Stabilizer KAK Shockwave Tube Castle Nut Mil-Spec Endplate Carbine Buffer Spring Standard Carbine Buffer  

  • KAK SHOCKWAVE PISTOL BRACE & LAW TACTICAL FOLDING STOCK ADAPTER BROWNELLS
    $364.99

    Item Code: #453217907

    Availability: In stock

    Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating. INCLUDES Shockwave Blade Pistol Stabilizer-Black KAK Shockwave Tube Castle Nut MIL-Spec Endplate Carbine Buffer Spring Standard Carbine Buffer Law Tactical Folding Stock Adapter  

  • AR-15 PISTOL STABILIZING ARM BRACE SIG SAUER
    $139.99

    Item Code: #453217907

    Availability: In stock

    SIG SAUER® offers this SB15 Pistol Stabilizing Brace, a shooter’s aid that is designed to improve the single-handed shooting performance of buffer tube equipped pistols. Made from high-quality, elasto-polymer, the SB15 is manufactured to close tolerances and fits all pistols equipped with an AR-style buffer tube 1.0” – 1.2” in diameter. The Pistol Stabilizing Brace uses the operator’s forearm to provide stable support, thereby minimizing accuracy-robbing spin and shift. A flexible cuff with two adjustable nylon straps allows the SB15 to be custom fit to any user.

    ATF has reviewed this product and determined that attaching the SB15 to a handgun does not alter the classification of the firearm or subject the firearm to NFA control if the SB15 is used as designed—to assist shooters in stabilizing a handgun while shooting with a single hand. The Sig Stabilizing Brace is not to be used as a shoulder stock. Using the brace as a stock while installed on a pistol constitutes a “redesign” of the device according to the ATF and misuse of the brace may subject the user to severe criminal penalties. If used as a stock, the resulting firearm will be subject to all provisions of the NFA and all NFA rules would apply. AR-15, Issue:11, Page:047 Big Book Catalog, Issue:69, Page:046
  • AR-15/M16 PISTOL BUFFER TUBE PHASE 5 TACTICAL
    $49.95 - $69.99

    Item Code: #453217907

    Availability: In stock

    Foam-Covered Tube For A Custom AR-Style Pistol Machined aluminum buffer tube assembly gives your AR-style pistol a neat, finished look. Nitrile foam rest padding resists chemicals, abrasions and temperatures from -20° F to 220° F. Includes mil-spec endplate and castle nut; accepts a mil-spec carbine buffer and spring. All NFA rules apply.

    AR-15, Issue:11, Page:042 Big Book Catalog, Issue:69, Page:040
  • GOVERNMENT MODEL VARIABLE POWER RECOIL SPRING WOLFF
    $7.89 - $43.99

    Item Code: #453217907

    Availability: In stock

    Variable rate springs function correctly with a wider range of loads than fixed rate springs can. Rate increases as spring is compressed; gives greater protection against frame battering, more consistent lockup and improved feeding, while allowing eas­ier manual cycling of the action. Recoil Calibration Pak contains 1 each of seven different springs; 16½ lb., 15 lb., 14 lb., 13 lb., 11 lb., 10 lb. and 9 lb., plus three extra power firing pin springs. Individual Spring Pak ­contains one variable power recoil spring and one extra power ­firing pin spring. Factory weight is 16 lb. 1911, Issue:11, Page:033 Big Book Catalog, Issue:69, Page:126 Sinclair, Issue:1A, Page:031
  • AR-15 PISTOL STABILIZING ARM BRACE KIT SIG SAUER
    $185.99

    Item Code: #453217907

    Availability: In stock

    SIG SAUER® offers this SB15 Pistol Stabilizing Brace, a shooter’s aid that is designed to improve the single-handed shooting performance of buffer tube equipped pistols. Made from high-quality, elasto-polymer, the SB15 is manufactured to close tolerances and fits all pistols equipped with an AR-style buffer tube 1.0” – 1.2” in diameter. The Pistol Stabilizing Brace uses the operator’s forearm to provide stable support, thereby minimizing accuracy-robbing spin and shift. A flexible cuff with two adjustable nylon straps allows the SB15 to be custom fit to any user. The BCM AR-15/M16 Pistol Receiver Extension kit has a 1.2” outside diameter which makes it compatible with the Sig Sauer SB-15 Stabilizing Brace. Made from 7075 T6 aluminum with a hard coat anodized finish, the kit also includes a castle nut, carbine buffer, carbine action spring, and QD receiver end plate. ATF has reviewed this product and determined that attaching the SB15 to a handgun does not alter the classification of the firearm or subject the firearm to NFA control if the SB15 is used as designed—to assist shooters in stabilizing a handgun while shooting with a single hand. The Sig Stabilizing Brace is not to be used as a shoulder stock. Using the brace as a stock while installed on a pistol constitutes a “redesign” of the device according to the ATF and misuse of the brace may subject the user to severe criminal penalties. If used as a stock, the resulting firearm will be subject to all provisions of the NFA and all NFA rules would apply.  

  • AR-15/M16 HEX 2 PISTOL BUFFER TUBES PHASE 5 TACTICAL
    $59.99 - $79.99

    Item Code: #453217907

    Availability: In stock

    The Phase 5 Hex 2 pistol buffer tube has been specifically designed to utilize the Sig Sauer SB15 Pistol Stabilizing Brace. The Hex-2 is a heavy duty USA certified 7075 T7 billet aluminum pistol buffer tube with the versatility to use the Phase 5 nitrile Foam Pad (included) or the SB15 Pistol Stabilizing brace (sold separately). Working closely with Sig Sauer the Phase 5 Hex-2 was a special project that involved a number of firearms instructors, law enforcement professionals and AR Pistol enthusiasts alike. While asking questions along the way and updating the design based on the recommendations given by all; the Hex-2 has become the perfect component for any AR pistol build. Both the Hex 2 pistol buffer tube and Hex2 pistol buffer tube kit include a castle nut, end plate and foam pad. The Hex 2 pistol buffer tube kit also includes a Phase 5 Enhanced Buffer Spring and carbine buffer. 

    AR-15, Issue:11, Page:042 Big Book Catalog, Issue:69, Page:040
  • RECOIL SPRING ASSEMBLY GLOCK
    $7.99

    Item Code: #453217907

    Availability: In stock

    FITS: Model 17, 9mm; Model 22, .40 S&W; Model 31, .357 SIG; Model 34, 9mm; Model 35, .40 S&W Recoil Spring Assembly - fits G17-G17R-G18-G22-G22P-G24-G31-G34-G35-G37 (silver spring - marked 5579 on end of recoil spring guide)

    “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:606 Big Book Catalog, Issue:68, Page:607 Big Book Catalog, Issue:68, Page:608
  • GUIDE ROD ASSEMBLY for GLOCK® LONE WOLF DIST.
    $23.99

    Item Code: #453217907

    Availability: In stock

    Stainless Steel Prevents Rod Flex & Spring Bind For More Reliable Cycling Hardened stainless steel guide rod won’t break or flex and bind the spring like the factory plastic rod. Helps prevent cycling problems, improves reliability and overall performance. Features a captured, ISMI chrome silicon flat spring that’s heat-treated, shot peened, and calibrated to the factory-spec 17 lb. weight. Steel Allen head screw and washer secure the spring to the rod, yet enable easy disassembly for spring replacement.

    “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:69, Page:212
  • 1911 RECOIL SPRING GUIDE WILSON COMBAT
    $29.99 - $36.99

    Item Code: #453217907

    Availability: In stock

    Eliminate Spring Kink & Bind; One-& Two-Piece Styles With a full-length guide rod in place giving no chance for recoil spring bind, a 1911 will chamber, cycle and extract more reliably. One-piece style available for Government/Gold Cup and Commander; Two-piece for Government/Gold Cup in both standard full-length and long slide for pistols equipped with partial or full-style compensators. Reverse Plug model fits Govt. length slides altered to accept tapered sleeve bushing. These are for standard recoil springs only, not Flat Wire Springs.

    1911, Issue:11, Page:016 Big Book Catalog, Issue:69, Page:109 Sinclair, Issue:1A, Page:015
  • RECOIL SPRING, BLUE, TWO TONE SIG SAUER
    $10.99

    Item Code: #453217907

    Availability: In stock

    FITS: P229, 9mm Big Book Catalog, Issue:68, Page:661
  • AR-15/M16 PISTOL BUFFER TUBES MIDWEST INDUSTRIES, INC.
    $44.99 - $74.99

    Item Code: #453217907

    Availability: In stock

    Fits Flush With Rear Of Brace Constructed of 6061 aluminum, these tubes are designed to be used as a stand-alone buffer tube or with the Sig Sauer SB15 Pistol Brace. Tube is proper length to fit flush with the end of pistol brace. A machined shoulder on tube keeps the brace from shifting forward. Tube has Mil-Spec diameter behind the threads and will accept a variety of end plates. Kit includes tube, lock ring, end plate, buffer spring and buffer.

  • SEMI-AUTO RECOIL MANAGEMENT SYSTEM SPRINCO USA
    $79.99 - $94.99

    Item Code: #453217907

    Availability: In stock

    Reduces Felt Recoil, Muzzle Climb & Frame Damage Drop-in sytem provides significant reduction in felt recoil and grip fatigue. Plus, it keeps the gun “flat” so your sights stay on target to help you shoot faster. Bright polished, stainless steel guide rod fitted with a chrome silicon, secondary spring that reduces slide-to-frame impact with no loss of reliable cycling. Softens the recoil impulse by gradually slowing the slide to prevent frame battering; helps extend your pistol’s service life. Models marked with a * include a new recoil spring, others use your factory or aftermarket spring. Drop-in installation requires no modifications to your pistol. Glock® Models fit gen 3 and earlier guns only.

    “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. 1911, Issue:11, Page:016 Big Book Catalog, Issue:69, Page:109 Big Book Catalog, Issue:69, Page:213 Sinclair, Issue:1A, Page:015
  • TYPE A RECOIL SPRING FOR TARGET (SOFTBALL) LOADS WOLFF
    $3.99 - $35.60

    Item Code: #453217907

    Availability: In stock

    Fine Tune For Light, Standard Or Heavy LoadsLike all Wolff springs, these for the 1911 Auto in .45, .38 ­Super or 9mm are the finest, most reliable, longest lasting ones available. The springs of choice for most of the nation's top builders. Except where noted, all recoil springs are supplied with an extra power firing pin spring that keeps the firing pin stop in place and prevents firing pin “float”; an addition recommended by pistolsmith Bill Wilson.TYPE A - For Target (Softball) Loads were originally ­recommended to us by Major F. B. Conway, U.S.A. - M.T.U. ­Whenever lighter than standard bullets or powder charges are being used, a lighter recoil spring is a must for correct functioning; however, they MUST NOT BE USED WITH STANDARD (HARDBALL) LOADS. The 10 lb. Type A spring is the old ­favorite (for reduced loads) and for that reason we also make it available as a single item (without the extra power firing pin spring). 1911, Issue:11, Page:033 Big Book Catalog, Issue:69, Page:125 Sinclair, Issue:1A, Page:031
  • AR/AK ENHANCED PISTOL CHEEK REST KIT W/ MFT SADDLE THORDSEN CUSTOMS LLC
    $84.99

    Item Code: #453217907

    Availability: In stock

    This kit is a Hybrid design utilizing our Enhanced Buffer Tube Cover kits and the Mission First Tactical EVOLV Battle Stock Attachment. The MFT EVOLV, and Buffer Tube Cover, are now pre-assembled in house, and mounted directly to the buffer tube using a specially designed steel bracket and adapter kit. The result is a rock solid, ergonomic cheek weld that provides stability for accurate, repeatable shooting, and a proper sight line for your favorite optics or sights. COMPATIBILITY: Mounts directly to any pistol, or pistol adapter, that accepts an AR-15 buffer tube/receiver extension. (1 3/16" threads) Some Receiver End plates with QD or loop sling attachment points on the back of the end plate may cause interference with the buffer tube cover when used with keyed buffer tubes. Extended length buffer tubes are compatible with all styles of endplate. FEATURES: Provides ergonomic cheek weld 2 Quick Detach Sling hard points (Enhanced Pistol Cheek Rest Kit only) 2 water tight rubber battery storage compartments SPECIFICATIONS: Steel mounting bracket Width: 3.5" Height: 2.5" Length 7.5" to 9.5" (installed length depending on buffer tube used) Weight: 14.5 oz. to 15.75 oz. RECOMENDED INSTALATION TOOLS: AR-15 Armorer's tool or carbine stock wrench (not included) 8mm socket or adjustable end wrench (not included) (2) 1/16" Hex wrenches (included)  Made in USA

  • 1911 SHOK-BUFFS® WILSON COMBAT
    $6.99

    Item Code: #453217907

    Availability: In stock

    Softens The Blow Of Recoil; Helps Prevent Frame DamagePrevents expensive frame damage when shooting high-pressure, major power factor loads. Replaceable, poly-fiber washer installs behind the recoil spring on any length guide rod. The shock absorbing action stops the slide from battering the frame. Injection molded for the optimum balance between shock absorption and longevity. Replace every 1,000 rounds. 1911, Issue:11, Page:016 Big Book Catalog, Issue:69, Page:110 Sinclair, Issue:1A, Page:016
  • 1911 CHROME SILICON RECOIL SPRING WOLFF
    $7.95 - $7.99

    Item Code: #453217907

    Availability: In stock

    Resists Taking A Set; Choice Of Three Weights To Match Your GunChrome silicon steel recoil spring resists taking a set even after thousands of compression cycles for improved performance and reliability. Available in three power ratings, so you can match spring weight to your specific gun and the type of load you shoot. Use Reduced Power 14 lb. spring for target loads with lighter than standard bullets or powder charges, Factory Standard 16 lb. spring for all-around reliability with the widest range of ammo, and Extra Power 18½ lb. spring for smoother cycling and less slide battering with heavy loads. Each spring comes with an extra power firing pin spring to ensure positive ignition and an extra margin of safety in preventing accidental discharges. 1911, Issue:11, Page:032 Big Book Catalog, Issue:69, Page:126 Sinclair, Issue:1A, Page:031
  • 1911 TWO-PIECE GUIDE ROD ED BROWN
    $29.99

    Item Code: #453217907

    Availability: In stock

    Prevents Recoil Spring Bind; Makes Takedown EasierFull-length, two piece design fully supports the recoil spring to help the pistol chamber, extract and cycle smoother. Helps prevent spring bind, makes slide takedown fast and simple. Long wearing, shock-resistant head and hardened stainless steel shaft stand up to both competition and duty use. 1911, Issue:11, Page:015 Big Book Catalog, Issue:69, Page:108 Sinclair, Issue:1A, Page:004 Sinclair, Issue:1A, Page:014
  • 1911 GUIDE ROD SYSTEM EGW
    $89.99 - $99.99

    Item Code: #453217907

    Availability: In stock

    Weight-Adding Tungsten Or Tough Stainless SteelHeavy, tungsten guide rod adds muzzle-steadying weight to help counter recoil.  Two-piece - full length, centerless ground construction simplifies disassembly. 

    1911, Issue:11, Page:015 Big Book Catalog, Issue:69, Page:109 Sinclair, Issue:1A, Page:015
  • 1911 ONE-PIECE GUIDE ROD EGW
    $14.99 - $24.99

    Item Code: #453217907

    Availability: In stock

    Simple, Robust Design For Smooth Function & ReliabilitySimple, strong, one-piece guide rods provide smooth function and outstanding reliability on competition and carry guns. Machined from solid bar stock without through hole for extra strength and resistance to battering. Additional weight up front improves recoil control, and flat face helps recoil buffers fit securely. Short, G.I. Style has rounded front end that resists snagging the recoil spring. Available in Government and Commander sizes in stainless and blued carbon steel. Full Length stainless steel rod guards against recoil spring bind for improved feeding and extraction. True, one-piece design with takedown hole has no threads to loosen or wear. Fits Government models with 5" barrels. 1911, Issue:11, Page:015 Big Book Catalog, Issue:69, Page:109 Sinclair, Issue:1A, Page:015
  • XD RECOIL SPG ASLY CAP 9/40/357/45GAP SPRINGFIELD ARMORY
    $29.99

    Item Code: #453217907

    Availability: In stock

    FITS: XD, 9mm, 40 S&W, 357 Sig, 45 Gap Big Book Catalog, Issue:68, Page:691
  • GUIDE ROD ASSEMBLY FOR GLOCK® LONE WOLF DIST.
    $29.95

    Item Code: #453217907

    Availability: In stock

    Solid stainless steel guide rod.  Precision CNC machined to accept a removable Allen head tip, for easy spring changes. Springs are made from 17-7 stainless steel and are calibrated to factory weights.

  • 1911 GOVERNMENT RECOIL SPRINGS ISMI
    $7.99

    Item Code: #453217907

    Availability: In stock

    Designed For Maximum Consistency & ReliabilityCAD designed and built to aerospace specifications from chrome silicon or corrosion resistant stainless steel for maximum durability, consistency and reliable performance. Heat treated, shot peened and fully stress relieved to minimize spring set.

    1911, Issue:11, Page:031 Big Book Catalog, Issue:69, Page:124 Sinclair, Issue:1A, Page:030
  • RECOIL GUIDE ROD ASSEMBLY SMITH & WESSON
    $11.99

    Item Code: #453217907

    Availability: In stock

    FITS: M&P (Semi-Auto), 9mm, .357, .40 Big Book Catalog, Issue:68, Page:673
Scroll