Handgun Tools

  • grid
  • list
  • 1911 LUG FITTING KIT BROWNELLS
    $20.99 - $179.99

    Item Code: #453217907

    Availability: In stock

    Helps You Fit The Standing Lugs On Oversized BarrelsThree essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case.

    1911, Issue:11, Page:055 Big Book Catalog, Issue:69, Page:145
  • 1911 STOCK TAPS BROWNELLS
    $29.99 - $39.99

    Item Code: #453217907

    Availability: In stock

    1911 Auto Stock Taps are high speed steel.

    1911, Issue:11, Page:042 Big Book Catalog, Issue:69, Page:133 Sinclair, Issue:1A, Page:038
  • ARMORER'S TOOLS for GLOCK® ARO-TEK
    $25.00 - $45.00

    Item Code: #453217907

    Availability: In stock

    Every Tool You Need To Work On A Glock Pistol Precision-made tools that will take care of most any field repair on the entire family of Glock Pistols. Kit includes: 3/16" nut driver for easy, front sight removal; .050" Allen wrench for rear sight removal, installation and adjustment; and a 3/32" punch for complete takedown. Tools feature hardened shafts and comfortable aluminum handles. Comes in convenient, snap-top, heavy-duty vinyl pouch.

    “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:69, Page:481
  • 1911 SEAR JIG ED BROWN
    $49.95

    Item Code: #453217907

    Availability: In stock

    Sets Critical Sear Angle For 1911 Trigger JobsContoured design fits comfortably in the palm of your hand, holds sear at the correct angle for precise stoning. Adjustable positioning screw lets you make exact sear angle changes to increase or decrease trigger pull weight. Use with 6"x½"x½" stones to achieve a mirror smooth finish for a clean, crisp letoff. Includes complete instructions and .020" shim. 1911, Issue:11, Page:061 Big Book Catalog, Issue:69, Page:148
  • 1911 PLUNGER TUBE STAKING TOOL & ACCESSORIES BROWNELLS
    $3.99 - $54.99

    Item Code: #453217907

    Availability: In stock

    Easy-to-use design lets you secure the plunger tube to the frame without fear of tube crush or expensive frame damage.  Adjustable to fit all makes of frames and tubes for both installing and re-tightening.  Hardened crimping point assures long tool life.  Plunger Tube Support slilps inside plunger tube and prevents compression damage while tube is being staked to frame.  Steel construction provides a rigid structure and many years of use.

    1911, Issue:11, Page:059 Big Book Catalog, Issue:69, Page:143 Big Book Catalog, Issue:69, Page:147
  • 1911 FRONT SIGHT STAKER BROWNELLS
    $15.99 - $49.99

    Item Code: #453217907

    Availability: In stock

    Makes Sight Staking EasierMakes front sight staking effortless, faster and far more accurate. Improved, offset punch design efficiently directs the full force of the hammer blow downward against the sight tenon. Hardened, "V"-shaped tip easily displaces both wide and narrow tenons for a great-looking, tight-fitting front sight that won't shoot loose. Large, square shaft is easier to hold, see and hit so there's less chance of a missed hammer blow striking your customer's expensive slide.

    1911, Issue:11, Page:053 1911, Issue:11, Page:062 Big Book Catalog, Issue:69, Page:143 Big Book Catalog, Issue:69, Page:150 Big Book Catalog, Issue:69, Page:476
  • 1911 SLIDE/FRAME RAIL FILE BROWNELLS
    $50.99

    Item Code: #453217907

    Availability: In stock

    One File Does It All: Trues, Deburrs & Squares Slide RailsClean up and square slide rails with one side of this file, turn it over and deburr or enlarge the rail channels with the other. Specially ground, stepped file does the job of two or more separate files and the safe edges make sure that only the areas that need to be cut, get cut. Simplifies, speeds up and adds precision to slide fitting work.

    1911, Issue:11, Page:053 Big Book Catalog, Issue:69, Page:142
  • COMBINATION TOOL for GLOCK® B & J MACHINE
    $22.95

    Item Code: #453217907

    Availability: In stock

    Handy Tool Makes Glock Sight Changes Easier Easy-to-use tool helps you remove factory front sights and install aftermarket sights. The punch is just the right size for depressing front sight center spreader; hex wrench holds and tightens the small retaining nut for the replacement sight. Non-slip knurled grip.

    “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:69, Page:481
  • 1911 LUG CUTTER BROWNELLS
    $53.99 - $82.99

    Item Code: #453217907

    Availability: In stock

    Recuts Lug For A Tight Fitting Barrel That Improves AccuracyHand operated, carbide cutter easily trims excess material from the bottom barrel lug when fitting custom or factory barrels to 1911 Autos. Cuts barrel lugs parallel, and with the correct height and radius, to help produce the best possible lockup. Use .186" cutter first, then progress to the .195" cutter if more material needs to be removed. Follow with careful hand fitting to achieve a firm, non-binding barrel-to-slide fit. Start small and check your work often. It is possible, with some slide/barrel combinations, that the .195" cutter could remove more material than necessary. Fits all 1911 Auto, Commander and Officers ACP, single- and double-stack frames. 1911, Issue:11, Page:055 Big Book Catalog, Issue:69, Page:145
  • 1911 BARREL LOCKING LUG FILE BROWNELLS
    $63.99

    Item Code: #453217907

    Availability: In stock

    For Critical Fitting Of Match-Grade Barrel Top LugsPrecision, surface-ground file deepens barrel locking lugs without increasing width. Safe on two sides to let the gunsmith file to a close fit with no chance of widening lug area. #2 cut, Swiss pattern cuts smoothly; little or no additional stoning/polishing is needed. 1911, Issue:11, Page:055 Big Book Catalog, Issue:69, Page:145
  • 1911 ANODIZED BUSHING WRENCH BROWNELLS
    $19.99 - $24.99

    Item Code: #453217907

    Availability: In stock

    Non-Marring Aluminum Gets The Tightest Bushings LooseThe perfect tool for every 1911 owner’s range bag or cleaning kit. Precision machined for a close fit to Government Model and Officers bushings. The extra thick, contoured handle fits comfortably in your hand; has plenty of heft for a good, solid grip. Turns the tightest bushings without slipping. Enhanced model has a handy flange that retains the recoil spring plug as you twist the bushing free. No more flying springs or plugs!

    1911, Issue:11, Page:053 1911, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:143 Big Book Catalog, Issue:69, Page:146
  • BOB MARVEL 1911 AUTO SEAR & HAMMER JIG BROWNELLS
    $159.99

    Item Code: #453217907

    Availability: In stock

    Unique Design Holds Both Sear & Hammer Three-piece, dual purpose jig gives perfectly stoned surfaces with exact 90° cuts every time. Guides stone over all styles of 1911 hammers and sears for a clean-breaking, match-quality let-off. Combination jig/vise holds hammers at the correct height. Plus, locks sear in proper relationship to hammer to make sharp primary/secondary cuts on hammer engaging surfaces. Use 6" x ½" x ½" stone.

    1911, Issue:11, Page:062 Big Book Catalog, Issue:69, Page:150
  • 1911 SLIDE RAIL MICROMETER STARRETT
    $269.99

    Item Code: #453217907

    Availability: In stock

    Quickly Choose Correct Slide Fitting Bar With Micrometer AccuracyFor match level accuracy, slide-to-frame fit on 1911-style au- tos must be closer than a gnat's whisker. This specially modified Starrett mike precisely measures the thickness of the slide's "rails". Makes choosing the correct slide fitting bar quick and accurate. No guesswork. Take measurement at three points along the slide, average readings together, and select a slide fitting bar (listed elsewhere) .001" to .002" thicker. 1911, Issue:11, Page:054 Big Book Catalog, Issue:69, Page:142
  • BROKEN SHELL EXTRACTOR BROWNELLS
    $19.99 - $22.99

    Item Code: #453217907

    Availability: In stock

    Easily Removes Broken Cases Without Field StrippingCase head separation from over-fired or out of spec brass won’t ruin your shooting experience if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from AR-type or any other firearm chambered for the .223/5.56 NATO or .308/7.62 NATO cartridges. Exclusive, threaded, two-piece design is adjustable for overall length, so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamber. The broken case will eject along with the broken shell extractor.

    AR-15, Issue:11, Page:082 AR-15, Issue:11, Page:083 AR-15, Issue:11, Page:088 Big Book Catalog, Issue:69, Page:082 Big Book Catalog, Issue:69, Page:083 Big Book Catalog, Issue:69, Page:086 Big Book Catalog, Issue:69, Page:433 Big Book Catalog, Issue:69, Page:466
  • 1911 ARMORER'S BLOCK 10-8 PERFORMANCE LLC
    $49.99

    Item Code: #453217907

    Availability: In stock

    For Fast, Easy Maintenance, While Protecting Pistol & Hands From DamageHandy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

    1911, Issue:11, Page:054 Big Book Catalog, Issue:69, Page:143
  • 1911 TRIGGER TRACK STONE BROWNELLS
    $19.99

    Item Code: #453217907

    Availability: In stock

    Polish The Channel To Reduce Trigger Pull Of 1911 AutosPrecision ground to fit inside the trigger bow frame ways; polishes out the manufacturing burrs and rough edges that interfere with trigger movement. Made of premium ceramic for fast cutting action that quickly imparts a very smooth surface. Easy cleanup with soap and water. Truly essential to achieving a light, crisp, trigger. 1911, Issue:11, Page:060 Big Book Catalog, Issue:69, Page:148
  • RUGER® MARK I/II™/III™ SPEED STRIP KIT MAJESTIC ARMS, LTD.
    $45.99 - $54.99

    Item Code: #453217907

    Availability: In stock

    Replaces Factory Parts For Fast Field Stripping & Cleaning Makes field stripping your Ruger® .22 pistol faster and easier by enabling rapid disassembly with a single Allen wrench for routine cleaning and maintenance. Replaces the factory hammer and sticky bolt stop pin that make bolt removal a real chore. Replacement parts are precision machined from high-grade stainless steel to tolerances that meet or exceed the factory parts. Requires no permanent modification to your pistol; gunsmith installation recommended. The 3.2 Conversion Kit will fit any Ruger® .22 Auto Pistol and allows MK III™ owners to safely omit the magazine disconnect feature. This kit is supplied with a new hammer pivot bushing, which reduces pre-travel by 65%.

    Big Book Catalog, Issue:69, Page:214
  • THE ALL-IN-ONE TOOL THE RIGHT TOOL CO.
    $21.95 - $27.95

    Item Code: #453217907

    Availability: In stock

    The Ruger® Mark™ series .22 pistols have renowned popularity, until cleaning time. We have all heard and read the stories about how frustrating disassembling and reassembling can be. Too many of us have just avoided it. No more! Now, with the user friendly, All-In-One Tool, there is a simpler, safer, and faster, method to clean our guns. The tool works on all the Mark series I, II, III™, and 22/45™ pistols with a square recess in the mainspring housing. and without altering the gun. For new guns or excessively dirty guns, we recommend the accessory stand. The stand frees up your second hand, allowing for more pressure to be placed on the durable tool which even stands up to hammering if necessary. From seasoned gun owners to first timers; they all agree this specifically engineered, made in the USA tool, works! The All-In-One Tool assists in the removal of the mainspring housing, disassembly/assembly of the bolt and barrel, and even holds down the follower button to help load the magazine.

    Big Book Catalog, Issue:69, Page:482
  • YAVAPAI 1911 SEAR TOOL BROWNELLS
    $159.99

    Item Code: #453217907

    Availability: In stock

    Adjustable For Angle Of Cut; Lets You Examine Actual Hammer & Sear Engagement At 20X! Developed by the gunsmithing program at Yavapai College to help their students learn the correct angle of hammer/sear engagement required for achieving a light, clean-breaking, match-quality trigger on the 1911 Auto. Precision-machined tool incorporates a roller-type, sear stoning fixture that allows incremental cutting of both primary and secondary sear angles plus, a 20 power magnifier for detailed, up-close examination and precise changes in individual hammer/sear engagement.

    1911, Issue:11, Page:060 Big Book Catalog, Issue:69, Page:148
  • PLUNGER TUBE STAKING TOOL GUN RUNNERS
    $32.99

    Item Code: #453217907

    Availability: In stock

    Easy, Two-Hand Operation Gives Tight CrimpCombination tool clamps plunger tube firmly and accurately in place, helps prevent expensive damage to the frame or the plunger tube. Locking bar is milled for a precise fit to both 5/32", Mil-Spec, and 3/16", oversize tubes. Spot faced holes along the back of the locking bar hold tool in correct alignment for a tight crimp. Hardened point gives years of service. 1911, Issue:11, Page:060 Big Book Catalog, Issue:69, Page:147
  • COMPLETE .38-.45 CHAMFERING KIT BROWNELLS
    $260.99

    Item Code: #453217907

    Availability: In stock

    Cuts Beautiful Chatter-Free Chamfer To Eliminate Bullet Splatter To cover the “whole nine yards” there’s the COMPLETE GUNSMITH’S CHAMFERING TOOL KIT. You get two 18° Chamfer Cutters, two 18° Brass Laps, the 11° Brass Lap, the 5° Brass Lap, the 11° Chamfer Cutter, the .38 caliber 5° Chamfer Cutter, all four 90° Facing Cutters, all four chamfer tool Pilots and, of course, the Handle, Tool Extension Rod, Centering Guide, Breaker Bar, and 3⁄32" Allen Wrench . . . all in the fitted, plastic, bench box.

    Big Book Catalog, Issue:69, Page:489
  • POLYMER ARMORER'S BLOCK & TOOLING PLATE APEX TACTICAL SPECIALTIES INC.
    $24.99 - $29.99

    Item Code: #453217907

    Availability: In stock

    Supports a polymer frame pistol for armory work and detail disassembly. Pre-positioned bosses, slots and holes remove pressure from critical function surfaces while pins are driven in and out. Thumb Safety and Magazine disconnect drop into holes and slots to prevent damage no matter what position they are in. High Density Polymer construction prevents marring of the frame while driving pins in and out. Retaining slots on each side of the block hold the striker making removal and installation of the striker spring a breeze. One side is for the 45 striker and the other is for the 9/40/357 striker. Moveable bosses are easily adjustable to position frames quickly and easily. Raised walls on each side of the block position the trigger bar within the trigger to easy trigger swapping. Apex logo and contact information cast directly into the body of the block for easy identification and access to Apex’s tech support staff. The Armorer's Tooling Plate is designed to attach directly to the underside of the Apex Piolymer Armorer's Block, providing a raised surface for you to work on your M&P and Glock Pistols.  The tooling plate has snap locks and slots to hold the 1/8" custom roll pin punch and 1/16" allen wrench.  Rubber feet grip the work surface, allowing for a sturdy hold while working.  a ring magnet on the underside of the plate will prevent magnetic parts from escaping.

    Big Book Catalog, Issue:69, Page:480 Big Book Catalog, Issue:69, Page:481
  • 1911 BARREL ALIGNMENT BLOCK BROWNELLS
    $39.95

    Item Code: #453217907

    Availability: In stock

    Fast, Accurate Hood-To-Slide Fitting On 1911 AutosMilled lug slot holds the barrel square in the slide for precise fitting of the hood to the bolt face slot. Provides a quick visual check for hood fit that eliminates time consuming assembly/disassembly for hood fitting. Fits between the slide rails to prevent barrel twist. Aids lockup and accuracy. May require minor fitting to slide. 1911, Issue:11, Page:059 Big Book Catalog, Issue:69, Page:147
  • SQUIB ROD BROWNELLS
    $29.99 - $85.99

    Item Code: #453217907

    Availability: In stock

    No-Mar Brass Rod Knocks Stuck Bullets Out Of BoresDon't let a stuck bullet from a "squib" or weak load cut short a shooting session. Far superior to other rods or makeshift punches, this non-marring brass rod fits the bore closely, can't wedge between bullet nose and rifling. Each rod is drilled and tapped to thread onto a Dewey cleaning rod; very handy for knocking stuck bullets out of rifle barrels. Big Book Catalog, Issue:69, Page:433 Big Book Catalog, Issue:69, Page:486
Scroll