Frame Parts

  • grid
  • list
  • 1911 PIN SET EGW
    $14.99

    Item Code: #453217907

    Availability: In stock

    Ready To Install, Hardened For Maximum DurabilityComplete, 11-piece set contains every pin for your 1911 pistol, perfect for installing a new set of pins during a restoration or for building a new custom pistol from the ground up. Designed to provide years of reliable service without binding, distorting, or breaking. Machined from hardened drill rod to G.I. specs for exceptional durability and fit, with a good-looking, uniform, matte blued finish.

    1911, Issue:11, Page:035 Big Book Catalog, Issue:69, Page:127 Sinclair, Issue:1A, Page:033
  • 92/96 OVERSIZE MAGAZINE RELEASE BERETTA USA
    $42.99

    Item Code: #453217907

    Availability: In stock

    FITS: M9A1, 9mm Allows for improved magazine release operation, especially when using larger grips.  Replaces factory magazine release.  Fits both the Model 92 and 96.  Does not include bushings and spring.  Requires re-use of existing bushing and spring.

    Big Book Catalog, Issue:68, Page:573
  • 1911 SINGLE STACK STANDARD RAMPED RECEIVER STI
    $224.99

    Item Code: #453217907

    Availability: In stock

    Precise Dimensions For A Match-Grade Fit That Gives Superb AccuracyFully machined single stack receiver is ready for the slide, barrel, and fire-control components of your choice to build a rugged, precision-shooting competition, combat, or carry pistol. Gives you the high quality of STI’s 2011 competition frames in a traditional, all-metal package with the popular enhancements you expect on high-performance custom 1911s. Machined to precise tolerances from high-quality 4140 carbon steel, then heat-treated to Rc 28-32 for exceptional wear resistance. Bead blasted to produce a smooth, non-reflective surface ready for the finish of your choice. Rails are cut slightly oversized, ready for honing to a tight, smooth, slop-free slide-to-frame fit to help ensure best accuracy. Holes for all pins and controls are precisely located, with a .250" tang radius to accommodate a beavertail grip safety. Available in two models, both with a standard dust cover. Standard model is machined from a high-grade investment casting and has a smooth, plain, front strap with a rounded, undercut triggerguard, and a Wilson/Nowlin-style feed ramp. Forged model is machined from a forged billet and has a straight, rounded triggerguard, and a standard ramp. Available with a plain, uncheckered front strap, or with 30 lpi checkering. Master model is investment cast and features a squared, undercut triggerguard, a cut to accept a barrel with Wilson/Nowlin feedramp, and a squared-off dustcover that extends the full length of a 5" slide for extra weight up front.

    1911, Issue:11, Page:003 Big Book Catalog, Issue:69, Page:096 Big Book Catalog, Issue:69, Page:378 Sinclair, Issue:1A, Page:002
  • 1911 BULLET PROOF CONCEALMENT MAGAZINE RELEASE WILSON COMBAT
    $31.99

    Item Code: #453217907

    Availability: In stock

    CNC machined from hardened, billet stainless steel, the radiused button of the Bullet Proof Concealment Magazine Release is slightly extended 1/16” over a stock part for fast, smooth operation and is equally suited for competition or carry. Perfectly checkered at 40 LPI for non-slip activation and engineered to maximum drop-in tolerances, this easy upgrade will improve the feel and performance of any 1911 pattern pistol. Minor fitting may be required. Magazine catch lock and spring not included.

    1911, Issue:11, Page:025 Big Book Catalog, Issue:69, Page:117
  • 1911 SINGLE STACK FORGED RECEIVER, CHECKERED STI
    $344.99

    Item Code: #453217907

    Availability: In stock

    Precise Dimensions For A Match-Grade Fit That Gives Superb Accuracy Fully machined single stack receiver is ready for the slide, barrel, and fire-control components of your choice to build a rugged, precision-shooting competition, combat, or carry pistol. Gives you the high quality of STI’s 2011 competition frames in a traditional, all-metal package with the popular enhancements you expect on high-performance custom 1911s. Machined to precise tolerances from high-quality 4140 carbon steel, then heat-treated to Rc 28-32 for exceptional wear resistance. Bead blasted to produce a smooth, non-reflective surface ready for the finish of your choice. Rails are cut slightly oversized, ready for honing to a tight, smooth, slop-free slide-to-frame fit to help ensure best accuracy. Holes for all pins and controls are precisely located, with a .250" tang radius to accommodate a beavertail grip safety. Available in two models, both with a standard dust cover. Standard model is machined from a high-grade investment casting and has a smooth, plain, front strap with a rounded, undercut triggerguard, and a Wilson/Nowlin-style feed ramp.

    1911, Issue:11, Page:003 Big Book Catalog, Issue:69, Page:096 Sinclair, Issue:1A, Page:002
  • 1911 SMOOTH MAINSPRING HOUSING WILSON COMBAT
    $46.99 - $48.99

    Item Code: #453217907

    Availability: In stock

    The addition of this Mainspring Housing is a great way to improve the grip and appearance of your 1911 Auto. You'll be amazed at the quality of this part. It's fully machined from bar stock with a smooth blue or stainless steel finish.

    1911, Issue:11, Page:023 Big Book Catalog, Issue:69, Page:116
  • 1911 FORGED SLIDE STOP CYLINDER & SLIDE
    $48.99

    Item Code: #453217907

    Availability: In stock

    Forged For Superior Strength & ReliabilityHigh-quality replacement slide stop is produced using proven manufacturing methods to ensure this vital part won’t fail you when the situation goes critical. Precision CNC machined to Mil-Spec dimensions from a true, steel forging, then heat-treated after machining for superior strength and long service life. 1911, Issue:11, Page:009 Big Book Catalog, Issue:69, Page:103 Sinclair, Issue:1A, Page:002 Sinclair, Issue:1A, Page:009
  • TAKE DOWN LEVER, NICKEL, TWO TONE SIG SAUER
    $39.99

    Item Code: #453217907

    Availability: In stock

    FITS: P220, .45 ACP; P225, 9mm; P226, 9mm, .357/40; P228, 9mm; P229, .357/40, 9mm; P245, .45 Big Book Catalog, Issue:68, Page:659 Big Book Catalog, Issue:68, Page:660 Big Book Catalog, Issue:68, Page:661 Big Book Catalog, Issue:68, Page:662
  • MAINSPRING SMITH & WESSON
    $5.99

    Item Code: #453217907

    Availability: In stock

    FITS: K Frame - Common Parts, .38; 581, .357; 586, .357; 681, .357; 686, .357; 696, .44 Spl; 24, .44 Spl; 25-2, .45 ACP; 25-5, .45 LC; 27-4, .357; 28, .357; 29-3, .44 Mag; 57-1, .41 Mag; 610, .10mm; 624, .44 Spl; 625, .45 ACP; 627, .357; 62 Big Book Catalog, Issue:68, Page:681 Big Book Catalog, Issue:68, Page:684 Big Book Catalog, Issue:68, Page:685 Big Book Catalog, Issue:68, Page:686 Big Book Catalog, Issue:68, Page:687 Big Book Catalog, Issue:68, Page:688 Big Book Catalog, Issue:68, Page:689 Big Book Catalog, Issue:68, Page:690
  • 1911 STANDARD RECEIVER SS, NO RAMP CASPIAN
    $199.99

    Item Code: #453217907

    Availability: In stock

    Build an outstanding, custom 1911 using one of these top-quality, single-stack receivers as the foundation. Models and features available for any custom project needs. Precision cast from carbon or stainless steel, and CNC machined to final dimensions. Heat treated to Rc 22-24 for optimum performance and durability. Oversize frame rails allow the gunsmith to achieve an exceptionally tight slide-to-frame fit for more consistent accuracy. Select models available with smooth front strap or with crisp CNC machine-cut checkering. Standard model offers a robust, economical foundation for a great, all-around shooter.

    Big Book Catalog, Issue:69, Page:095
  • BUCKMARK EXTENDED MAGAZINE RELEASE TACTICAL SOLUTIONS, LLC
    $29.99

    Item Code: #453217907

    Availability: In stock

    FEATURES: Matte finish Extended button Easy installation with included wrench Hard anodized Machined 6061 T6 aluminum button with anodized finish. Steel magazine catch. Threadlocker included.BENEFITS: Easy manipulation of magazine release Faster reloads Easier to manipulate for those with smaller hands Less twisting of hand to release magazine

  • 2011 TACTICAL LONG/WIDE RAMPED FRAME STI
    $599.99

    Item Code: #453217907

    Availability: In stock

      Composite & Steel Frame Kit For Building Lightweight Pistols Ready-to-build, high-tech, double stack frame can be fashioned into your customer’s dream, competition or self-defense pistol. The 2011’s modular grip frame is made from fiber-filled, nylon composite that’s married to a CNC machined, 4140 steel upper, for the very best combination of durability, precision fit and lighter weight. Features: 20 lpi checkering on the front strap and triggerguard; heavy-duty dust cover for scope mounting; pre-contoured to accept high-ride beavertails and aftermarket grip safeties with .250" radius; integral magazine well, oversized rails. Ready for gunsmith fitting. Frames are available in two models: Long/Wide - Dust cover is approximately the same width and length as a Govt. length slide for increased weight. Ramped - pre-machined to accept the Nowlin/Wilson-style ramped barrels.

    1911, Issue:11, Page:003 Big Book Catalog, Issue:69, Page:097 Sinclair, Issue:1A, Page:002
  • EXTENDED SLIDE LOCK LEVER FOR GLOCK® JENTRA
    $11.99

    Item Code: #453217907

    Availability: In stock

    Features: Longer than factory slide lock lever, but not long enough to hand up on holsters Precision laser cut Simple installation Instructions included Fits all Glock® generations and models except for the G36 Matte black finish Benefits: Allows for easier slide removal Easy to install with no fitting required Precision laser cut to ensure a perfect fit

    “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
  • Slide Lock Spring GLOCK
    $3.49

    Item Code: #453217907

    Availability: In stock

    FITS: Model 19, 9mm; Model 23, .40 S&W; Model 32, .357 SIG Slide Lock Spring - fits G19-G23-G32-G38 (new stainless steel full-width spring - upgrade for original narrow spring)

    “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:606 Big Book Catalog, Issue:68, Page:607 Big Book Catalog, Issue:68, Page:608
  • GRIP FRAME, ROUND GUARD, STEEL, IN-THE-WHITE RUGER
    $102.99

    Item Code: #453217907

    Availability: In stock

    FITS: New Model Blackhawk®; Super Blackhawk®, .44 Mag; Vaquero®

    Big Book Catalog, Issue:68, Page:648 Big Book Catalog, Issue:68, Page:650 Big Book Catalog, Issue:68, Page:651
  • 2011 LONG/WIDE RAMPED FRAME STI
    $624.99

    Item Code: #453217907

    Availability: In stock

    Composite & Steel Frame Kit For Building Lightweight Pistols Ready-to-build, high-tech, double stack frame can be fashioned into your customer’s dream, competition or self-defense pistol. The 2011’s modular grip frame is made from fiber-filled, nylon composite that’s married to a CNC machined, 4140 steel upper, for the very best combination of durability, precision fit and lighter weight. Features: 20 lpi checkering on the front strap and triggerguard; heavy-duty dust cover for scope mounting; pre-contoured to accept high-ride beavertails and aftermarket grip safeties with .250" radius; integral magazine well, oversized rails. Ready for gunsmith fitting. Frames are available in two models: long/Wide - Dust cover is approximately the same width and length as a Govt. length slide for increased weight. Ramped - pre-machined to accept the Nowlin/Wilson-style ramped barrels.

    1911, Issue:11, Page:003 Big Book Catalog, Issue:69, Page:097 Sinclair, Issue:1A, Page:002
  • SLIDE STOP PARA-ORDNANCE
    $35.99

    Item Code: #453217907

    Availability: In stock

    FITS: P13.45/.45LTD & P15.40 - Common Parts; P14.45/LTD, P16.40/LTD, P18.9 - Common Parts; 12.45 LDA & 14.40 LDA - Common Parts; 14.45LDA/LTD, 16.40LDA/LTD, 18.9LDA/LTD - CP 1911, Issue:09, Page:069 1911, Issue:09, Page:070 1911, Issue:09, Page:071 Big Book Catalog, Issue:68, Page:634 Big Book Catalog, Issue:68, Page:635
  • 1911 PLAIN GOVERNMENT MAGWELL MAINSPRING HOUSINGS FUSION FIREARMS
    $67.95 - $79.95

    Item Code: #453217907

    Availability: In stock

    Fusion Firearms, 1911 Plain Mainspring housing MagWell in Stainless Steel, Matte, polished, and black finish. It includes a Bar stock machined Mainspring housing & MagWell, CNC Machined parts from Stainless Steel Bar stock, NO-MIM. These are Top Quality Professional Series Parts; Made from the best materials and processes available in today's market. 2 piece Dovetail base well with set screw. This is a Pro-Series Plain mainspring housing. All Machined from Stainless steel bar stock and great looking and feeling plain back pattern. These are as nice as they get. Will work for full size and commander size 1911 pistols.

    Big Book Catalog, Issue:69, Page:115
  • SIDE PLATE SCREW, ROUND HEAD, BLUE SMITH & WESSON
    $3.99

    Item Code: #453217907

    Availability: In stock

    FITS: 31, .32; 32, .32; 34, .22; 36-2, .38; 37, .38; 38, .38; 42/442, .38; 49, .38; 14, .38; 17-4, .22; 18-4, .22; 586-3, .357; 25-7, .45 LC; 29-4, .44 Mag; 57-1, .41 Mag Big Book Catalog, Issue:68, Page:675 Big Book Catalog, Issue:68, Page:676 Big Book Catalog, Issue:68, Page:677 Big Book Catalog, Issue:68, Page:678 Big Book Catalog, Issue:68, Page:682 Big Book Catalog, Issue:68, Page:683 Big Book Catalog, Issue:68, Page:685 Big Book Catalog, Issue:68, Page:686 Big Book Catalog, Issue:68, Page:687 Big Book Catalog, Issue:68, Page:688
  • COMPETITION MAGWELL FOR GLOCK® T.H.E. ACCESSORIES
    $74.95

    Item Code: #453217907

    Availability: In stock

    Oversized magwell guides the magazine into the gun quickly and smoothly to eliminate fumbling during reloads. Helps you make mag changes without taking your eyes off the target, and aids in maintaining a consistent hand position on the grip. Installs in minutes by inserting the brass channel insert in the bottom of the grip behind the magazine well and locking it with the machine screw (hex wrench included). Requires no permanent modification to pistol; remove and return to factory configuration at any time. Brass insert adds weight to aid in recoil control for faster follow-up shots. Will NOT fit generation 4 models.

    “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:69, Page:215
  • GRIP FRAME, ROUND GUARD, SS RUGER
    $113.99

    Item Code: #453217907

    Availability: In stock

    FITS: New Model Blackhawk®; New Model Single-Six®

    Big Book Catalog, Issue:68, Page:648
  • XD/XDM STAINLESS STEEL PINS POWDER RIVER PRECISION INC
    $29.99

    Item Code: #453217907

    Availability: In stock

    Replacement pins for XD or XDM Precision hardened stainless steel Includes two trigger/locking blocks pins, one sear pin, one ejector pin, and one striker safety pin All pins are CNC machined to a .0005" tolerance Can be used to replace lost or damaged pins Gives your XD a custom look American Pistolsmith Guild approved
  • 92/96 EXTENDED MAGAZINE RELEASE WILSON COMBAT
    $41.99

    Item Code: #453217907

    Availability: In stock

    The extended Beretta® 92/96 magazine release makes it easy to depress your magazine button under stress. Useful for shooters with all hand sizes. No fitting required. Allows shooters with all hand sizes to release the magazine with little or no shift in grip. CNC machined from 4140 heat treated steel. Extended checkered pad. Black Armor Tuff finish. Ambidextrous, can be installed on right or left side of pistol. NOTE: Does not include bushings and spring. Requires re-use of your bushings and spring.

    Big Book Catalog, Issue:69, Page:216
  • 1911 MAINSPRING CAP PIN BROWNELLS
    $2.09 - $12.99

    Item Code: #453217907

    Availability: In stock

    U.S.-Made Parts For The 1911 Auto PistolEach and every part is U.S.-made, high-quality and guaranteed to fit and function just like the factory part. 1911, Issue:11, Page:033 1911, Issue:11, Page:034 Big Book Catalog, Issue:69, Page:126 Big Book Catalog, Issue:69, Page:127 Sinclair, Issue:1A, Page:031 Sinclair, Issue:1A, Page:033
Scroll