Cleaning Rods Accessories

  • grid
  • list
  • Sinclair O-Ring Rod Guide, 284 Winchester SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bolt or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22,COOPER 16(WSSM), BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.

    Sinclair, Issue:1B, Page:134
  • Sinclair Solvent Port SINCLAIR INTERNATIONAL
    $6.95

    Item Code: #453217907

    Availability: In stock

    Sinclair solvent ports permit the user to apply solvent to a brush, patch, or mop without getting it all over the rifle or their work area. Our solvent ports plug into the end of your Sinclair cleaning rod guides and seal with a silicone O-ring. Each solvent port has an opening where you can apply solvent directly onto the cleaning implement being used. One size port for .17 caliber thru 6.5 mm rod guides, a second size for .270 caliber up to .30 caliber and a third size for 8mm and 338 caliber. These solvent ports will fit all Sinclair Rod Guides except for RG4A54 and RG4A5417 rimfire guides. Sinclair, Issue:5B, Page:140
  • DECAPPING PINS FORSTER
    $3.29 - $4.99

    Item Code: #453217907

    Availability: In stock

    Replacement decapping pins come in three sizes: PPC, Long and Short. PPC pins fit .060 inch diameter flash holes, Long and Short pins fit .080 inch diameter flash holes. All pins are packaged in five.

    Sinclair, Issue:5B, Page:048
  • 260 to 30-06 O-Ring Snout for #2 AP Rod Guide SINCLAIR INTERNATIONAL
    $7.95

    Item Code: #453217907

    Availability: In stock

    These o-ring snouts are an upgrade to our Adjustable Rod Guides to give you an even better seal in the chamber. These snouts are of the same design as the snouts on our solid Delrin one-piece rod guides. Currently available in selected cartridge family sizes (both short and long action) for our .17 thru .25 caliber and 6.5mm thru .30 caliber All-Purpose Rod Guides. If you need help in ordering these please call and talk to one of our Sales Representatives. Snouts also fit the older Stoney Point small and medium rod guides.

    Sinclair, Issue:5B, Page:139
  • V STIX, 17-20 CAL 40 INCH BORE TECH
    $29.99

    Item Code: #453217907

    Availability: In stock

    Bore Tech V-Stix arepacked with all thefeatures, quality andperformance you havecome to expect from Bore Tech. The V-Stix utilize a caliber specific steelcore and high performance coating, which is extremely chemical resistantand durable. It includes their ergonomic cushioned handle with ball bearingsystem - an industry favorite. Like all Bore Tech cleaning rod handles, these arecaliber specific color coded. Barrel-safe female threaded brass ferrules completethis affordable package. The Bore Tech V-Stix offers a high quality cleaning rodwithout the high dollar price tag. Jags sold separately. Sinclair, Issue:5B, Page:134
  • V STIX, 22 CAL-6.5MM 40 INCH BORE TECH
    $29.99

    Item Code: #453217907

    Availability: In stock

    Bore Tech V-Stix arepacked with all thefeatures, quality andperformance you havecome to expect from Bore Tech. The V-Stix utilize a caliber specific steelcore and high performance coating, which is extremely chemical resistantand durable. It includes their ergonomic cushioned handle with ball bearingsystem - an industry favorite. Like all Bore Tech cleaning rod handles, these arecaliber specific color coded. Barrel-safe female threaded brass ferrules completethis affordable package. The Bore Tech V-Stix offers a high quality cleaning rodwithout the high dollar price tag. Jags sold separately. Sinclair, Issue:5B, Page:134
  • U.S. ROD ADAPTER PARKER-HALE
    $3.99

    Item Code: #453217907

    Availability: In stock

    Connect U.S. brushes, jags, and loops to Parker Hale products.

    Big Book Catalog, Issue:67, Page:320
  • Sinclair O-Ring Bore Guide, Blaser Rifles SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Sinclair, Issue:1B, Page:134
  • Sinclair O-Ring Rod Guide, 308/30-06 Family SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bold or bolt carrier. They feature a snout with a silicone "O"-ring that inserts into your chamber, sealing the barrel off from the receiver. The "O"-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock "O"-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an "O"-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair "O"-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides.

    Sinclair, Issue:1B, Page:134
  • Sinclair O-Ring Rod Guide, 17 Rem thru 204 SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bolt or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22,COOPER 16(WSSM), BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.

    Sinclair, Issue:4S, Page:015
  • Sinclair O-Ring Rod Guide, PPC's and 220 Swift SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bold or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Shellin DGA, Bat Models SV,S,V,B,M,L (2 bolt lugs),McMillan Hunter & Tactical.

    Sinclair, Issue:1B, Page:134
  • Sinclair O-Ring Rod Guide, 308/30-06 Family SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bold or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Kleingunther and TC Icon, Weatherby MK 5 (old Weatherby & new w/ 6 locking lug bolt).

    Sinclair, Issue:1B, Page:134
  • Sinclair Single Shot Guide, 17Rem/204Ruger SINCLAIR INTERNATIONAL
    $18.95

    Item Code: #453217907

    Availability: In stock

    These rod guides fit most falling blocks such as Ruger #1's, Browning 78's, High Walls, Low Walls, etc. The rod guides have a snout that inserts directly into the chamber and controls the cleaning rod. These rod guides are cartridge family specific and will accept Sinclair Solvent Ports. Rimless cartridges only.

    Sinclair, Issue:5B, Page:138
  • Sinclair AR-15 Guide, Grendel, 6mm AR, PPCs SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Sinclair AR-15 Guide, Grendel, 6mm AR, PPCs Big Book Catalog, Issue:69, Page:331 Sinclair, Issue:5B, Page:015 Sinclair, Issue:5B, Page:138
  • Sinclair O-Ring Rod Guide, 257 thru 280 SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bold or bolt carrier. They feature a snout with a silicone "O"-ring that inserts into your chamber, sealing the barrel off from the receiver. The "O"-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock "O"-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an "O"-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair "O"-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Steyr SSG, Steyr Mannlicher, Hall Express, GA Precision (338 Lapua), Sako TRG-S, Stiller TAC 338, Witchita Classic.

    Sinclair, Issue:1B, Page:134
  • Special tooling HK33 315676 HOLDER. PATCH, PULL THROUGH HECKLER & KOCH
    $14.99

    Item Code: #453217907

    Availability: In stock

    FITS: Special tooling HK33 Big Book Catalog, Issue:68, Page:614
  • Sinclair O-Ring Rod Guide, WSM's 7mm - 30 cal SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bold or bolt carrier. They feature a snout with a silicone "O"-ring that inserts into your chamber, sealing the barrel off from the receiver. The "O"-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock "O"-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an "O"-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair "O"-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Browning L70, Sako A3, A4, L61, Finnbear, 491, 591, 691, Howa 1500,Tikka, 595, 590, 695, and 690, Cooper 22, Savage AXIS, Kimber 84 (WSM). NOTE: Measure across around area of bolt about in middle with set of dial calipers. Contact Sinclair Reloading tech for proper rod guide.

    Sinclair, Issue:1B, Page:134
  • Sinclair Pierce Style Cleaning Jags SINCLAIR INTERNATIONAL
    $4.45 - $4.76

    Item Code: #453217907

    Availability: In stock

    Sinclair pierce style jags are preferred by shooters in many disciplines. Our jag completely pierces and captures the patch while it passes through the bore. Patches fall off upon exiting. Sinclair jags are currently available as female threaded jags (compatible with Dewey rods).

    Sinclair, Issue:3B, Page:135
  • Sinclair O-Ring Rod Guide, 22-250 thru 243 SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bold or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Shellin DGA, Bat Models SV,S,V,B,M,L (2 bolt lugs),McMillan Hunter & Tactical.

    Sinclair, Issue:1B, Page:134
  • Sinclair O-Ring Rod Guide, 22-250 thru 243 SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bold or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Sako model 75 (measure), Savage MOD 25, Savage MOD 40 (.204,.222 &.223) NOTE: Measure across around area of bolt about in middle with set of dial calipers. Contact Sinclair Reloading tech for proper rod guide.

    Sinclair, Issue:1B, Page:134
  • M14/M1A BORE GUIDE ARA- MOR
    $17.99

    Item Code: #453217907

    Availability: In stock

    Eliminates Muzzle Damage & Cleaning Rod WearCenters and supports your cleaning rod close to the rifle's muzzle. Taper machined to provide an exact fit inside the flash suppressors on M14/M1A Match Rifles. Big Book Catalog, Issue:69, Page:331
  • Sinclair Service Rifle Port SINCLAIR INTERNATIONAL
    $10.95

    Item Code: #453217907

    Availability: In stock

    This cleaning aid is designed for service rifles chambered in 243 Win, 308 Win, and 30-06 (M1, M1A, and M-14’s). This receiver port inserts into your action and plugs the chamber just like a rod guide. Solvents are prevented from running down into the trigger group and into the bedding. It can also be used as an access port to apply more solvent prior to pulling your brush back through the bore. This receiver port also keeps the bolt in the open position and prevents you from ramming your brush or jag into the bolt face.

    Sinclair, Issue:5B, Page:140
  • Sinclair O-Ring Rod Guide, WSSM's 22 - 6.5mm SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bolt or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22,COOPER 16(WSSM), BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.

    Sinclair, Issue:1B, Page:134
  • Sinclair O-Ring Rod Guide, PPC's and 220 Swift SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bold or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Sinclair, Issue:1B, Page:134
Scroll