Cleaning Rods Accessories

  • grid
  • list
  • Sinclair Single Rod Case SINCLAIR INTERNATIONAL
    $17.95 - $59.99

    Item Code: #453217907

    Availability: In stock

    Our rod cases are designed to hold Dewey cleaning rods for safe storage and transport. Cases are powder coated aluminum tubing with Delrin locking collars and nylon thumbscrews. You can put two rods together using our bracket set to make a double rod holder. Buy two rod cases and brackets in a set and save $5.45 Rod cases are 48 inches long to accommodate 44 inch rods with a jag or brush installed, but can be shortened easily using a hacksaw or tubing cutter.

    Sinclair, Issue:5B, Page:135
  • COMPLETE 26 PIECE JAG & BRUSH SET LYMAN
    $29.99

    Item Code: #453217907

    Availability: In stock

    Lyman's new 26 Piece Jag & Brush Set keeps your bore cleaning necessities protected and organized in a durable, hinged storage container. Containing 26 pieces organized by caliber, this set has slots for each jag and brush from .17 to .45 calibers. The hinged covers are see-through and slots are clearly marked for quick selection. All jags and brushes use standard 8-32 thread except the .17 caliber which uses a 5-40 thread. This set is the perfect companion to Lyman's Universal Cleaning Rod System.

  • Sinclair Chamber Plug SINCLAIR INTERNATIONAL
    $2.95 - $10.95

    Item Code: #453217907

    Availability: In stock

    This unique product seals the chamber and bore toprevent solvents and oils from running back into theaction when the rifle is left in an upright position.For heavily fouled barrels, we use these plugs to sealthe chamber and then fill the barrel with our favoritesolvent. Then we let the barrel sit for a while. If leftovernight, you should seal the muzzle end with tapeto prevent evaporation. Make sure you fill the barrelall the way to the muzzle end. If storing guns for along time, these plugs can keep rust preventativeagents and oils from seeping down into the actionand trigger group area. Oil and debris washed inwith excess solvent harms more triggers than justabout anything. Replacement O -rings come in packsof 5. Sinclair, Issue:5B, Page:014 Sinclair, Issue:5B, Page:136
  • RIMFIRE BORE GUIDE POSSUM HOLLOW
    $19.99

    Item Code: #453217907

    Availability: In stock

    Protects Chamber & Bore Has clearance cut for ejectors; keeps solvent out of the action and trigger. Large, funnel-like opening provides easy starting for brush and patches. Extra long for scoped rifles.

    Big Book Catalog, Issue:69, Page:331
  • AR-15 BORE GUIDE SATERN
    $34.99

    Item Code: #453217907

    Availability: In stock

    Prevents Damage To Chamber & BoreClean your AR-15 from the breech to prevent muzzle or chamber damage. Insert into the upper receiver, replacing the bolt carrier, for safe and easy cleaning. Self-centers in the receiver. O-ring seal at breech and solvent port keeps chemicals out of the action.

    AR-15, Issue:11, Page:079 Big Book Catalog, Issue:69, Page:077
  • BRASS RODS DEWEY
    $30.49

    Item Code: #453217907

    Availability: In stock

    High-Quality Brass; Smooth Roller Bearing HandlesTraditional, solid brass; will not damage delicate rifling. AR-15, Issue:04, Page:070 Big Book Catalog, Issue:69, Page:333
  • Sinclair Cleaning Rod Wall Bracket SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Sinclair Cleaning Rod Wall Mount Bracket lets you store up to 6 of your cleaning rods on the wall and out of the way. This wall mounted bracket will accept cleaning rods from Dewey and a number of other cleaning rods on the market today. Specially designed to accommodate cleaning rods stored in our Sinclair Cleaning Rod Cases and Brackets.

    Sinclair, Issue:5B, Page:135
  • JAG AND BRUSH BOX MTM
    $3.95

    Item Code: #453217907

    Availability: In stock

    This jag and brush box from MTM will keep your jags, brushes, bore mops and adapters organized and conveniently available. Rummaging around in a big shooting box to find a brush is no fun at all. This divided box is made of solvent impervious polypropylene in clear. Many shooters have one box for each rifle or caliber. Sinclair, Issue:5B, Page:141
  • SHOTGUN JAGS BORE TECH
    $7.49

    Item Code: #453217907

    Availability: In stock

    These uniquepatch jagswork extremelywell for cleaningdebris fromyour shotgun.Each jag hasa hard nylontip that is surroundedby flexiblefingers that push the patch against the walls ofthe barrel for optimum cleaning performance. Fitsall standard shotgun cleaning rods. Outstandingproduct! Male threaded - 5/16-27. Sinclair, Issue:5B, Page:156
  • RAPID ROD BROWNELLS
    $19.99

    Item Code: #453217907

    Availability: In stock

    Collapsible Rod Carries Easily In The Field; Clears Obstruction Fast Segmented aluminum tubing with internal stainless steel cable assemble quickly into a rigid cleaning rod for emergency field use. Collapses into a compact package only 5" long. A must-have for dislodging snow, ice, mud and other bore obstructions you could encounter on remote hunting trips. Also comes in handy for loosening stuck cases, shotgun shells or wads. Fits .22 to .54 caliber barrels up to 26" long, 20 to 10 gauge shotgun barrels up to 32" long; plus .410 and 28 gauge barrels up to 26" long. Knurled handle with tension adjustment shaft draws cable tight to lock rod segments in place. Includes a plastic patch loop (.22 caliber), five aluminum jags (.22 to .54 caliber), and nylon carry case with belt loop.

    Big Book Catalog, Issue:69, Page:332 Sinclair, Issue:5B, Page:135
  • Sinclair O-Ring Rod Guide, 257 thru 280 SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bolt or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22,COOPER 16(WSSM), BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.

    Sinclair, Issue:1B, Page:134
  • COPPER ELIMINATOR MALE-THREAD JAGS DEWEY
    $4.95 - $5.19

    Item Code: #453217907

    Availability: In stock

    All-Aluminum Components Eliminate "False-Positive" Copper Fouling IndicationsCleaning jags have machined aluminum components that don’t react with ammonia-based solvents like brass parts sometimes do. Won’t produce blue-green stains on your patches that can be misinterpreted as “false positive” indications of copper fouling, so you’ll know when your bore really is copper-free. Similar in hardness to brass, Copper Eliminator parts won’t scratch the bore or damage the muzzle, and they’ll stand up to hard use. Pure aluminum jags are specifically designed for use on Copper Eliminator rods to maintain the full integrity of the CE system. They can also be used on other rods with the same female thread patterns.

    Big Book Catalog, Issue:69, Page:332
  • M1/M1A Chamber Brushes DEWEY
    $6.95 - $7.24

    Item Code: #453217907

    Availability: In stock

    These chamber cleaning brushes are designed to remove the burnt powder fouling which forms in the chamber of M1A, M14 rifles and M1 Garand rifles. Easy to use, apply solvent to the brush, push the brush into the chamber, close the bolt on the back of the brush, and rotate the brush with a punch or screwdriver in the ratchet holes of the brush. Pull back while ratcheting the brush to remove it.

    Sinclair, Issue:5B, Page:141
  • SERVICE RIFLE SOLVENT PORT POSSUM HOLLOW
    $11.99

    Item Code: #453217907

    Availability: In stock

    Protects Chamber & BoreAllows you to apply solvent to a patch or brush without contaminating the action, or your fingers. Tray collects loosened fouling and prevents it from falling into the action. Rubber O-ring seals-off the chamber area to prevent leakage and keeps port securely in place. Big Book Catalog, Issue:69, Page:331
  • JAG BORE TECH
    $6.99

    Item Code: #453217907

    Availability: In stock

    Machined from a special copper-free alloy that’s as gentle on the bore as brass, while it eliminates false indications of blue copper fouling on the patch. Holds the patch tight in two places, doubling the effective cleaning area. Reverse taper self-guides into bore.

    Big Book Catalog, Issue:69, Page:332 Sinclair, Issue:5B, Page:133
  • "PARKER HALE" STYLE JAGS DEWEY
    $6.29 - $8.19

    Item Code: #453217907

    Availability: In stock

    Traditional, Wrap-Around-Style Grips Patch In Both DirectionsCut slightly smaller so a full size patch can be wrapped around the jag. Exposes more patch area to the bore to give quicker, more uniform cleaning. Serrated teeth are fully covered and grip the patch to hold it when scrubbing in both directions. Big Book Catalog, Issue:69, Page:334
  • COPPER ELIMINATOR ROD ADAPTERS DEWEY
    $3.89

    Item Code: #453217907

    Availability: In stock

    All-Aluminum Components Eliminate "False-Positive" Copper Fouling IndicationsCleaning adapters have machined aluminum components that don’t react with ammonia-based solvents like brass parts sometimes do. Won’t produce blue-green stains on your patches that can be misinterpreted as “false positive” indications of copper fouling, so you’ll know when your bore really is copper-free. Similar in hardness to brass, Copper Eliminator parts won’t scratch the bore or damage the muzzle, and they’ll stand up to hard use. Aluminum adapters convert male-threaded Dewey rods to accept 8-32 male-threaded Copper Eliminator brushes and jags.

    Big Book Catalog, Issue:69, Page:332 Sinclair, Issue:5B, Page:133
  • PISTOL CLEANING ROD 9" BROWNELLS
    $13.99

    Item Code: #453217907

    Availability: In stock

    Brass Won't Mar Rifling; Includes Brass Patch Loop Our solid brass cleaning rod removes fouling from bores and muzzles without damaging delicate rifling. Rod end has standard 8-32 female threads for attaching accessories, such as brushes, jags, or the included Dewey universal, all-caliber (.22 and up) brass patch loop. Non-rotating wood handle is ergonomically shaped for superior comfort.

  • BORE STIX BORE TECH
    $49.99

    Item Code: #453217907

    Availability: In stock

    Fully Coated Rod Cleans Without ScratchingCushioned handle has 22 ball bearings inside for effortless rotation so the patch always follows the rifling. Full-length epoxy coating on spring steel rod is impervious to solvents. Index dots on the handle let you check twist rates. 6mm BR rod gives an exact fit to 6mm benchrest, varmint, and hunting rifles.

    Big Book Catalog, Issue:69, Page:332 Sinclair, Issue:5B, Page:134
  • HANDGUN CHAMBER & CYLINDER CLEANING ROD DEWEY
    $10.95

    Item Code: #453217907

    Availability: In stock

    Short Length For Maximum Leverage & No FlexNon-scratching, solid brass cleaning rod helps make short work of stubborn chamber fouling in handguns. Threaded rod accepts popular 8-32 tpi chamber brushes, mops, and other accessories. Allows cleaning of any pistol or revolver chamber from .357/.38/9mm to .50 caliber. Large, comfortable handle ensures your cleaning energy is directed on removing crud instead of controlling the rod. 1911, Issue:04, Page:057 Big Book Catalog, Issue:69, Page:339
  • UNIVERSAL CLEANING ROD SET LYMAN
    $67.99

    Item Code: #453217907

    Availability: In stock

    Lyman's new Universal Cleaning Rod Set contains the 4 most popular rods in their Universal Cleaning Rod System, a 12" (22-26 Cal), 12" (27-45 Cal), 36" (22-26 Cal), and 36" (27-45 Cal). Handle is comfortable, ergonomic and chemical resistant. Interchangeable rods in different calibers and lengths for handguns and rifles. Made of the finest spring steel and a tough proprietary epoxy coating.

  • LARGE BORE RODS DEWEY
    $34.49 - $55.99

    Item Code: #453217907

    Availability: In stock

    Eliminates Flex, Speeds Cleaning Large, 5/16" diameter, nylon-coated, steel rods decrease flex and provide easier cleaning of rifle bores .35 caliber and larger.  Ball bearings in the handle let the rod follow the rifling. 35C rod has a 12-28 thread that accepts Dewey Jags and Adapters. Comes with 12-28 to 8-32 tpi adapter and 35J rifle jag. 50 BMG combines a 44" coated section with a stainless steel extension for 62" of cleaning length. A ball bearing handle lets the rod follow the rifling. Specifically designed for use on your 50 BMG. Only the 44", coated section touches your bore; the additional 18" provides additional torque and length to clear oversize actions. Includes 50J, .50 caliber brass jag and brush adapter to accept 8-32 accessories.

    Big Book Catalog, Issue:69, Page:332 Big Book Catalog, Issue:69, Page:333 Sinclair, Issue:4X, Page:018
  • Sinclair O-Ring Rod Guide, 22-250 thru 243 SINCLAIR INTERNATIONAL
    $19.99

    Item Code: #453217907

    Availability: In stock

    Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bold or bolt carrier. They feature a snout with a silicone ""O""-ring that inserts into your chamber, sealing the barrel off from the receiver. The ""O""-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock ""O""-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an ""O""-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair ""O""-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. If we do not inventory a rod guide for your specific action/cartridge combination, we can probably make it. These non-inventoried rod guides are considered custom rod guides and are a few dollars extra, please allow 4-6 weeks for custom rod guides. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22,COOPER 16(WSSM), BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.

    Sinclair, Issue:4S, Page:015
  • DRILL CHUCKABLE SHOTGUN CLEANING ROD BROWNELLS
    $44.99

    Item Code: #453217907

    Availability: In stock

    Mounts To A Hand Drill For Easy CleaningOne-piece, brass cleaning rod has a 1⁄4" hex that lets you drive it with your hand drill to power scrub the toughest lead and plastic fouling without damage to the bore. 5⁄16"-27 female thread accepts standard shotgun accessories. We like to wrap some stainless steel sponge, #080-000-321 around a nylon bore brush; a couple of passes and the bore is clean! Not for use with .410 bore barrels. Big Book Catalog, Issue:69, Page:332
Scroll